Contact

Contact Form

"*" indicates required fields

+49 6373 500 80-0

Call

info@sbn.de

Write now

Technology Center: Linear Technology

Marcus Bulgan

Email: m.bulgan@sbn.de Phone: +49 6373 500 80 39 Languages: english, german

Download vCard QR Code

Southwest Technology Center

Roger Dawidowsky

Email: r.dawidowsky@sbn.de Phone: +49 6373 500 80 35 Languages: english, german

Download vCard QR Code

Technology Center Central/West

Christian Kreul

Email: c.kreul@sbn.de Phone: +49 6373 50080 34 Languages: english, german

Download vCard QR Code

Headquarters

Schönenberg-Kübelberg Headquarters

Our headquarters are located in Schönenberg-Kübelberg. Thanks to our convenient location, we’re always easy to reach if you’d like to stop by in person.

SBN WÄLZLAGER GMBH
Jan-Hutzel-Weg 1
 66901 Schönenberg-Kübelberg  (
Enter “Am Kübelberg” into your GPS)

E‑MAIL: INFO@SBN.DE
TEL.: +49 6373 500 80–0

North-East Technology Center

Peter Tiede

Email: p.tiede@sbn.de Phone: +49 6373 500 80 36 Languages: english, german, russian

Download vCard QR Code

Technical Center for the Netherlands, Belgium, and Northeast Europe

Stefan Gerritsen

Email: s.gerritsen@sbn.de Phone: +31 622 77 39 86 Languages: dutch, english, german

Download vCard QR Code

Single-row miniature deep-groove ball bearings (ball bearings with a bore diameter < 10 mm are classified as “miniature bearings”) are one of the most commonly used bearing types and are employed in a variety of applications.

This bearing design accommodates both radial and axial forces from both directions; given its compact dimensions, it is suitable for very high rotational speeds and, thanks to its low-friction, low-noise, and low-vibration operation, can be used in a wide variety of applications.

In addition, our bearings are also available in corrosion-resistant versions.
You can find the corresponding product selection in the “Stainless Steel Roller Bearings” section.

In addition to the bearing models listed here, SBN offers custom solutions tailored to your needs.
We would be happy to advise you personally—please contact us!

General

Tolerances according to DIN 620, tolerance class PN/P0
Higher accuracy classes (e.g., P6, P5) available upon request
Bearing clearances MC1 through MC6 and custom bearing clearances available
Also available in inch measurements

Inner and outer rings

Through-hardened roller bearing steel with a very high degree of purity for a longer service life
High-precision raceways for optimal friction and noise performance
Additional options (e.g., coatings, carbonitriding, custom dimensions) are available upon request

Rolling elements

Precision balls made of high-purity, through-hardened rolling-element bearing steel for smooth operation; alternatively, made of ceramic (electrically insulated hybrid bearings)

Gaskets / Cover Plates

Open design, with a non-abrasive cover plate (2Z), with a non-abrasive seal (2RU or LLB), and with an abrasive seal (2RS or LLU/LLUX)
Cover plates are made of sheet steel, and gaskets are made of NBR reinforced with sheet steel
Application-specific seal options (e.g., FKM/Viton, PTFE/Teflon) available upon request

Cage

Made of steel or glass-fiber-reinforced plastic, as required
Other cage materials (e.g., PEEK, Torlon) are available upon request

Lubricant

Available in greased and oiled versions
Standard grease: S001 | Standard oil: S901
More than 200 lubricants are available for application-specific solutions

Examples of Use

Automated Placement Machines
Electric Motors
Transmission
Fan
Medical and Dental Technology
Measurement Technology

Single-row miniature deep-groove ball bearings with a flange on the outer ring (ball bearings with a bore diameter < 10 mm are classified as “miniature bearings”) can be axially secured in the housing in a space-saving manner and offer the advantage that no housing shoulders need to be provided, thereby simplifying the machining of the housing bore.

This bearing design accommodates both radial and axial forces from both directions; given its compact dimensions, it is suitable for very high rotational speeds and, thanks to its low-friction, low-noise, and low-vibration operation, can be used in a wide variety of applications.

In addition, our bearings are also available in corrosion-resistant versions. You can find the corresponding selection of products in the “Stainless Steel Rolling Bearings” section.

In addition to the bearing models listed here, SBN offers custom solutions tailored to your needs.
We would be happy to advise you personally—please contact us!

General

Tolerances according to DIN 620, tolerance class PN/P0
Higher accuracy classes (e.g., P6, P5) available upon request
Bearing clearances MC1 through MC6 and custom bearing clearances available
Also available in inch measurements

Inner and outer rings

Through-hardened roller bearing steel with a very high degree of purity for a longer service life
High-precision raceways for optimal friction and noise performance
Flange on the outer ring
Additional options (e.g., coatings, carbonitriding, custom dimensions) are available upon request

Rolling elements

Precision balls made of high-purity, through-hardened rolling-element bearing steel for smooth operation; alternatively, made of ceramic (electrically insulated hybrid bearings)

Gaskets / Cover Plates

Open design, with a non-abrasive cover plate (2Z), with a non-abrasive seal (2RU or LLB), and with an abrasive seal (2RS or LLU/LLUX)
Cover plates are made of sheet steel, and gaskets are made of NBR reinforced with sheet steel
Application-specific seal options (e.g., FKM/Viton, PTFE/Teflon) available upon request

Cage

Made of steel or glass-fiber-reinforced plastic, as required
Other cage materials (e.g., PEEK, Torlon) are available upon request

Lubricant

Available in greased and oiled versions
Standard grease: S001 | Standard oil: S901
More than 200 lubricants are available for application-specific solutions

Examples of Use

Electric Motors
Industrial Joysticks
Food Technology
Medical and Dental Technology
Prosthetics

Stainless-steel miniature deep-groove ball bearings with a flange on the outer ring (ball bearings with a bore diameter < 10 mm are classified as “miniature bearings”) are used in a variety of applications where there is a risk of corrosion.

Stainless steel, which is highly resistant to corrosion, is used for the rings, rolling elements, cages, and end plates. Abrasive and non-abrasive seals are made of NBR reinforced with sheet steel.

Miniature deep-groove ball bearings with a flange on the outer ring can be axially secured in the housing in a space-saving manner and offer the advantage that no housing shoulders are required, thereby simplifying the machining of the housing bore.

This bearing design accommodates both radial and axial forces from both directions; given its compact dimensions, it is suitable for very high rotational speeds and, thanks to its low-friction, low-noise, and low-vibration operation, can be used in a wide variety of applications.

In addition, our bearings are also available in chrome steel versions.
You can find the corresponding product selection in the "Chrome Steel Roller Bearings" section.

In addition to the bearing models listed here, SBN offers custom solutions tailored to your needs.
We would be happy to advise you personally—please contact us!

General

Tolerances according to DIN 620, tolerance class PN/P0
Higher accuracy classes (e.g., P6, P5) available upon request
Bearing clearances MC1 through MC6 and custom bearing clearances available
Also available in inch measurements

Inner and outer rings

Made of corrosion-resistant steel
High-precision raceways for optimal friction and noise performance
Flange on the outer ring
Additional options (e.g., coatings, carbonitriding, custom dimensions) are available upon request

Rolling elements

Precision balls made of corrosion-resistant steel for smooth operation; alternatively, made of ceramic (electrically insulated hybrid bearings)

Gaskets / Cover Plates

Open design, with a non-abrasive cover plate (2Z), with a non-abrasive seal (2RU or LLB), and with an abrasive seal (2RS or LLU/LLUX)
Cover plates are made of corrosion-resistant steel, and gaskets are made of sheet steel-reinforced NBR
Application-specific seal options (e.g., FKM/Viton, PTFE/Teflon) available upon request

Cage

Made of corrosion-resistant steel or glass-fiber-reinforced plastic, as required
Other cage materials (e.g., PEEK, Torlon) are available upon request

Lubricant

Available in greased and oiled versions
Standard grease: S001 | Standard oil: S901
More than 200 lubricants are available for application-specific solutions

Examples of Use

Electric Motors
Galvanometer
Food Technology
Medical and Dental Technology
Measurement Technology

Single-row miniature deep-groove ball bearings with a flange on the outer ring in inch dimensions (ball bearings with a bore diameter < 10 mm are classified in the "miniature bearings" group) can be axially secured in the housing in a space-saving manner and offer the advantage that no housing shoulders need to be provided, thereby simplifying the machining of the housing bore.

This bearing design accommodates both radial and axial forces from both directions; given its compact dimensions, it is suitable for very high rotational speeds and, thanks to its low-friction, low-noise, and low-vibration operation, can be used in a wide variety of applications.

In addition, our bearings are also available in corrosion-resistant versions.
You can find the corresponding product selection in the “Stainless Steel Roller Bearings” section.

In addition to the bearing models listed here, SBN offers custom solutions tailored to your needs.
We would be happy to advise you personally—please contact us!

General

Tolerances according to DIN 620, tolerance class PN/P0
Higher accuracy classes (e.g., P6, P5) available upon request
Bearing clearances MC1 through MC6 and custom bearing clearances available
Also available in metric sizes

Inner and outer rings

Through-hardened roller bearing steel with a very high degree of purity for a longer service life
Other materials and coatings available upon request
High-precision raceways for optimal friction and noise performance
Flange on the outer ring
Additional options (e.g., coatings, carbonitriding, custom dimensions) are available upon request

Rolling elements

Precision balls made of high-purity, through-hardened rolling-element bearing steel for smooth operation; alternatively, made of ceramic (electrically insulated hybrid bearings)

Gaskets / Cover Plates

Open design, with a non-abrasive cover plate (2Z), with a non-abrasive seal (2RU or LLB), and with an abrasive seal (2RS or LLU/LLUX)
Cover plates are made of sheet steel, and gaskets are made of NBR reinforced with sheet steel
Application-specific seal options (e.g., FKM/Viton, PTFE/Teflon) available upon request

Cage

Made of steel or glass-fiber-reinforced plastic, as required
Other cage materials (e.g., PEEK, Torlon) are available upon request

Lubricant

Available in greased and oiled versions
Standard grease: S001 | Standard oil: S901
More than 200 lubricants are available for application-specific solutions

Examples of Use

Electric Motors
Industrial Joysticks
Food Technology
Medical and Dental Technology
Prosthetics

Single-row miniature flanged stainless steel deep-groove ball bearings with inch-based dimensions (ball bearings with a bore diameter < 10 mm are classified as “miniature bearings”) are used in a variety of applications where there is a risk of corrosion.

Stainless steel, which is highly resistant to corrosion, is used for the rings, rolling elements, cages, and end plates. Abrasive and non-abrasive seals are made of NBR reinforced with sheet steel.

Miniature deep-groove ball bearings with a flange on the outer ring can be axially secured in the housing in a space-saving manner and offer the advantage that no housing shoulders are required, thereby simplifying the machining of the housing bore.

This bearing design accommodates both radial and axial forces from both directions; given its compact dimensions, it is suitable for very high rotational speeds and, thanks to its low-friction, low-noise, and low-vibration operation, can be used in a wide variety of applications.

In addition, our bearings are also available in chrome steel versions.
You can find the corresponding product selection in the "Chrome Steel Roller Bearings" section.

In addition to the bearing models listed here, SBN offers custom solutions tailored to your needs.
We would be happy to advise you personally—please contact us!

General

Tolerances according to DIN 620, tolerance class PN/P0
Higher accuracy classes (e.g., P6, P5) available upon request
Bearing clearances MC1 through MC6 and custom bearing clearances available
Also available in metric sizes

Inner and outer rings

Made of corrosion-resistant steel
High-precision raceways for optimal friction and noise performance
Flange on the outer ring
Additional options (e.g., coatings, carbonitriding, custom dimensions) are available upon request

Rolling elements

Precision balls made of corrosion-resistant steel for smooth operation; alternatively, made of ceramic (electrically insulated hybrid bearings)
Other materials available upon request

Gaskets / Cover Plates

Open design, with a non-abrasive cover plate (2Z), with a non-abrasive seal (2RU or LLB), and with an abrasive seal (2RS or LLU/LLUX)
Cover plates are made of corrosion-resistant steel, and gaskets are made of sheet steel-reinforced NBR
Application-specific seal options (e.g., FKM/Viton, PTFE/Teflon) available upon request

Cage

Made of corrosion-resistant steel or glass-fiber-reinforced plastic, as required
Other cage materials (e.g., PEEK, Torlon) are available upon request

Lubricant

Available in greased and oiled versions
Standard grease: S001 | Standard oil: S901
More than 200 lubricants are available for application-specific solutions

Examples of Use

Electric Motors
Galvanometer
Food Technology
Medical and Dental Technology
Measurement Technology

Stainless-steel miniature deep-groove ball bearings (ball bearings with a bore diameter of less than 10 mm are classified as “miniature bearings”) are used in a variety of applications where there is a risk of corrosion.

Stainless steel, which is highly resistant to corrosion, is used for the rings, rolling elements, cages, and end plates. Abrasive and non-abrasive seals are made of NBR reinforced with sheet steel.

This bearing design accommodates both radial and axial forces from both directions; given its compact dimensions, it is suitable for very high rotational speeds and, thanks to its low-friction, low-noise, and low-vibration operation, can be used in a wide variety of applications.

In addition, our bearings are also available in chrome steel versions.
You can find the corresponding product selection in the "Chrome Steel Roller Bearings" section.

In addition to the bearing models listed here, SBN offers custom solutions tailored to your needs.
We would be happy to advise you personally—please contact us!

General

Tolerances according to DIN 620, tolerance class PN/P0
Higher accuracy classes (e.g., P6, P5) available upon request
Bearing clearances MC1 through MC6 and custom bearing clearances available
Also available in inch measurements

Inner and outer rings

Made of corrosion-resistant steel
High-precision raceways for optimal friction and noise performance
Additional options (e.g., coatings, carbonitriding, custom dimensions) are available upon request

Rolling elements

Precision balls made of corrosion-resistant steel for smooth operation; alternatively, made of ceramic (electrically insulated hybrid bearings)

Gaskets / Cover Plates

Open design, with a non-abrasive cover plate (2Z), with a non-abrasive seal (2RU or LLB), and with an abrasive seal (2RS or LLU/LLUX)
Cover plates are made of corrosion-resistant steel, and gaskets are made of sheet steel-reinforced NBR
Application-specific seal options (e.g., FKM/Viton, PTFE/Teflon) available upon request

Cage

Made of corrosion-resistant steel or glass-fiber-reinforced plastic, as required
Other cage materials (e.g., PEEK, Torlon) are available upon request

Lubricant

Available in greased and oiled versions
Standard grease: S001 | Standard oil: S901
More than 200 lubricants are available for application-specific solutions

Examples of Use

Electric Motors
Food Technology
Medical and Dental Technology
Measurement Technology
Pumps
Tonearm Mounting

Single-row miniature deep-groove ball bearings in imperial sizes (ball bearings with a bore diameter < 10 mm are classified as "miniature bearings") are a bearing variant capable of withstanding both radial and axial forces from both directions.
Given their small dimensions, this bearing type is suitable for very high rotational speeds and can be used in a wide range of applications due to its low-friction, low-noise, and low-vibration operating characteristics.

In addition, our bearings are also available in corrosion-resistant versions.
You can find the corresponding product selection in the “Stainless Steel Roller Bearings” section.

In addition to the bearing models listed here, SBN offers custom solutions tailored to your needs.
We would be happy to advise you personally—please contact us!

General

Tolerances according to DIN 620, tolerance class PN/P0
Higher accuracy classes (e.g., P6, P5) available upon request
Bearing clearances MC1 through MC6 and custom bearing clearances available
Also available in metric sizes

Inner and outer rings

Through-hardened roller bearing steel with a very high degree of purity for a longer service life
High-precision raceways for optimal friction and noise performance
Additional options (e.g., coatings, carbonitriding, custom dimensions) are available upon request

Rolling elements

Precision balls made of high-purity, through-hardened rolling-element bearing steel for smooth operation; alternatively, made of ceramic (electrically insulated hybrid bearings)

Gaskets / Cover Plates

Open design, with a non-abrasive cover plate (2Z), with a non-abrasive seal (2RU or LLB), and with an abrasive seal (2RS or LLU/LLUX)
Cover plates are made of sheet steel, and gaskets are made of NBR reinforced with sheet steel
Application-specific seal options (e.g., FKM/Viton, PTFE/Teflon) available upon request

Cage

Made of steel or glass-fiber-reinforced plastic, as required
Other cage materials (e.g., PEEK, Torlon) are available upon request

Lubricant

Available in greased and oiled versions
Standard grease: S001 | Standard oil: S901
More than 200 lubricants are available for application-specific solutions

Examples of Use

Automated Placement Machines
Electric Motors
Transmission
Fan
Medical and Dental Technology
Measurement Technology

Stainless-steel miniature deep-groove ball bearings with dimensions in inches (ball bearings with a bore diameter < 10 mm are classified as “miniature bearings”) are used in a variety of applications where there is a risk of corrosion.

Stainless steel, which is highly resistant to corrosion, is used for the rings, rolling elements, cages, and end plates. Abrasive and non-abrasive seals are made of NBR reinforced with sheet steel.

Miniature deep-groove ball bearings with a flange on the outer ring can be axially secured in the housing in a space-saving manner and offer the advantage that no housing shoulders are required, thereby simplifying the machining of the housing bore.

This bearing design accommodates both radial and axial forces from both directions; given its compact dimensions, it is suitable for very high rotational speeds and, thanks to its low-friction, low-noise, and low-vibration operation, can be used in a wide variety of applications.

In addition, our bearings are also available in chrome steel versions.
You can find the corresponding product selection in the "Chrome Steel Roller Bearings" section.

In addition to the bearing models listed here, SBN offers custom solutions tailored to your needs.
We would be happy to advise you personally—please contact us!

General

Tolerances according to DIN 620, tolerance class PN/P0
Higher accuracy classes (e.g., P6, P5) available upon request
Bearing clearances MC1 through MC6 and custom bearing clearances available
Also available in metric sizes

Inner and outer rings

Made of corrosion-resistant steel
High-precision raceways for optimal friction and noise performance
Additional options (e.g., coatings, carbonitriding, custom dimensions) are available upon request

Rolling elements

Precision balls made of corrosion-resistant steel for smooth operation; alternatively, made of ceramic (electrically insulated hybrid bearings)

Gaskets / Cover Plates

Open design, with a non-abrasive cover plate (2Z), with a non-abrasive seal (2RU or LLB), and with an abrasive seal (2RS or LLU/LLUX)
Cover plates are made of corrosion-resistant steel, and gaskets are made of sheet steel-reinforced NBR
Application-specific seal options (e.g., FKM/Viton, PTFE/Teflon) available upon request

Cage

Made of corrosion-resistant steel or glass-fiber-reinforced plastic, as required
Other cage materials (e.g., PEEK, Torlon) are available upon request

Lubricant

Available in greased and oiled versions
Standard grease: S001 | Standard oil: S901
More than 200 lubricants are available for application-specific solutions

Examples of Use

Electric Motors
Food Technology
Medical and Dental Technology
Measurement Technology
Pumps
Tonearm Mounting

Stainless-steel HNS miniature deep-groove ball bearings (ball bearings with a bore diameter < 10 mm are classified as “miniature bearings”) are used in a variety of applications where there is a risk of corrosion.

The rings, rolling elements, cages, and cover plates are made of HNS (High Nitrogen Steel), a high-performance stainless steel that offers significantly higher corrosion resistance than conventional corrosion-resistant SUS440C steel. Innovative heat treatment technology and the addition of extra chemical elements enable use in alkaline, saline, and humid environments.
Abrasive and non-abrasive seals are made of sheet steel-reinforced NBR.

This bearing design accommodates both radial and axial forces from both directions; given its compact dimensions, it is suitable for very high rotational speeds and, thanks to its low-friction, low-noise, and low-vibration operation, can be used in a wide variety of applications.

In addition, our bearings are also available in chrome steel versions.
You can find the corresponding product selection in the "Chrome Steel Roller Bearings" section.

In addition to the bearing models listed here, SBN offers custom solutions tailored to your needs.
We would be happy to advise you personally—please contact us!

General

Tolerances according to DIN 620, tolerance class PN/P0
Higher accuracy classes (e.g., P6, P5) are available upon request
Bearing clearances MC1 through MC6 and custom bearing clearances available

Inner and outer rings

Made of corrosion-resistant, high-performance HNS (High Nitrogen Steel)
High-precision raceways for optimal friction and noise performance
Additional options (e.g., coatings, carbonitriding, custom dimensions) are available upon request

Rolling elements

Precision balls made of corrosion-resistant steel for smooth operation; alternatively, ceramic balls (electrically insulated hybrid bearings)

Gaskets / Cover Plates

Open design, with a non-abrasive cover plate (2Z), with a non-abrasive seal (2RU or LLB), and with an abrasive seal (2RS or LLU/LLUX)
Cover plates are made of corrosion-resistant, high-performance HNS (high-nitrogen) steel, and gaskets are made of sheet steel-reinforced NBR.
Application-specific seal options (e.g., FKM/Viton, PTFE/Teflon) available upon request

Cage

Made of corrosion-resistant high-performance HNS (high-nitrogen) steel or glass-fiber-reinforced plastic, as required
Other cage materials (e.g., PEEK, Torlon) are available upon request

Lubricant

Available in greased and oiled versions
Standard grease: S001 | Standard oil: S901
More than 200 lubricants are available for application-specific solutions

Examples of Use

Electric Motors
Food Technology
Fan
Medical and Dental Technology
Measurement Technology

Thin-section bearings of the 617…, 618…, 619…, 638…, ET… and AY… are characterized in particular by their small cross-sections and low weight, which allows these bearing variants to be used in weight-saving and space-optimized designs.

This bearing design accommodates both radial and axial forces from both directions and is versatile due to its low-friction, low-noise, and low-vibration operation.

In addition, our bearings are also available in corrosion-resistant versions.
You can find the corresponding product selection in the “Stainless Steel Roller Bearings” section.

In addition to the bearing models listed here, SBN offers custom solutions tailored to your needs.
We’d be happy to advise you personally—please contact us!

General

Tolerances according to DIN 620, tolerance class PN/P0
Higher accuracy classes (e.g., P6, P5) available upon request
Bearing clearances C2 through C5 and custom bearing clearances available
Small cross-sectional area relative to the bore diameter
Lightweight

Inner and outer rings

Through-hardened roller bearing steel with a very high degree of purity for a longer service life
High-precision raceways for optimal friction and noise performance
Additional options (e.g., coatings, carbonitriding, custom dimensions) are available upon request

Rolling elements

Precision balls made of high-purity, through-hardened roller bearing steel for smooth operation; alternatively, made of ceramic (electrically insulated hybrid bearings)

Gaskets / Cover Plates

Open design, with a non-abrasive cover plate (2Z), with a non-abrasive seal (2RU or LLB), and with an abrasive seal (2RS or LLU/LLUX)
Cover plates are made of sheet steel, and gaskets are made of sheet steel-reinforced NBR
Application-specific seal options available upon request

Cage

Made of steel or glass-fiber-reinforced plastic, as required
Other cage models available upon request

Lubricant

Available in greased and oiled versions
Standard grease: S001 | Standard oil: S901
More than 200 lubricants are available for application-specific solutions

Examples of Use

Rotary Encoder
E-Bike Drive System
Electric motor
Galvanometers/Laser Technology
Robotics
Food Technology
Medical Technology
Measurement Technology
Textile Machinery

Thin-section bearings of the F 617…, F 618…, F 619… and F 638… series with flanges can be axially secured in the housing in a space-saving manner and offer the advantage that no housing shoulders need to be provided, thereby simplifying the machining of the housing bore.

They are characterized in particular by their small cross-sections and low weight, which makes it possible to use these bearing variants to create weight-saving designs that make optimal use of available space.

This bearing design accommodates both radial and axial forces from both directions and is versatile due to its low-friction, low-noise, and low-vibration operation.

In addition, our bearings are also available in corrosion-resistant versions.
You can find the corresponding selection of products in the “Stainless Steel Roller Bearings” section.

In addition to the bearing models listed here, SBN offers custom solutions tailored to your needs.
We’d be happy to advise you personally—please contact us!

General

Tolerances according to DIN 620, tolerance class PN/P0
Higher accuracy classes (e.g., P6, P5) available upon request
Small cross-sectional area relative to the bore diameter
Lightweight

Inner and outer rings

Through-hardened roller bearing steel with a very high degree of purity for a longer service life
High-precision raceways for optimal friction and noise performance
Flange on the outer ring
Additional options (e.g., coatings, carbonitriding, custom dimensions) are available upon request

Rolling elements

Precision balls made of high-purity, through-hardened roller bearing steel for smooth operation; alternatively, made of ceramic (electrically insulated hybrid bearings)

Gaskets / Cover Plates

Open design, with a non-abrasive cover plate (2Z), with a non-abrasive seal (2RU or LLB), and with an abrasive seal (2RS or LLU/LLUX)
Cover plates are made of sheet steel, and gaskets are made of sheet steel-reinforced NBR
Application-specific seal options available upon request

Cage

Made of steel or glass-fiber-reinforced plastic, as required
Other cage models available upon request

Lubricant

Available in greased and oiled versions
Standard grease: S001 | Standard oil: S901
More than 200 lubricants are available for application-specific solutions

Examples of Use

Robotics
Food Technology
Medical Technology
Measurement Technology
Sensors
Textile Machinery

Stainless-steel thin-section bearings of the 617…VA, 618…VA, 619…VA, and 638…VA series are used in a variety of applications where there is a risk of corrosion.

They are characterized in particular by their small cross-sections and low weight, which makes it possible to use these bearing variants to create weight-saving designs that make optimal use of available space.

Stainless steel, which is highly resistant to corrosion, is used for the rings, rolling elements, cages, and cover plates. Abrasive and non-abrasive seals are made of NBR reinforced with sheet steel.

This bearing design accommodates both radial and axial forces from both directions and is versatile due to its low-friction, low-noise, and low-vibration operation.

In addition, our bearings are also available in chrome steel versions.
You can find the corresponding product selection in the "Chrome Steel Roller Bearings" section.

In addition to the bearing models listed here, SBN offers custom solutions tailored to your needs.
We’d be happy to advise you personally—please contact us!

General

Tolerances according to DIN 620, tolerance class PN/P0
Higher accuracy classes (e.g., P6, P5) available upon request
Bearing clearances C2 through C5 and custom bearing clearances available
Small cross-sectional area relative to the bore diameter
Lightweight

Inner and outer rings

Made of corrosion-resistant steel
High-precision raceways for optimal friction and noise performance
Additional options (e.g., coatings, carbonitriding, custom dimensions) are available upon request

Rolling elements

Precision balls made of corrosion-resistant steel for smooth operation; alternatively, ceramic balls (electrically insulated hybrid bearings)

Gaskets / Cover Plates

Open design, with a non-abrasive cover plate (2Z), with a non-abrasive seal (2RU or LLB), and with an abrasive seal (2RS or LLU/LLUX)
Cover plates are made of corrosion-resistant steel, and gaskets are made of sheet steel-reinforced NBR
Application-specific seal options available upon request

Cage

Made of corrosion-resistant steel or glass-fiber-reinforced plastic, as required
Other cage models available upon request

Lubricant

Available in greased and oiled versions
Standard grease: S001 | Standard oil: S901
More than 200 lubricants are available for application-specific solutions

Examples of Use

Rotary Encoder
Galvanometers/Laser Technology
Laser scanner
Robotics
Food Technology
Medical Technology
Measurement Technology
Textile Machinery

Thin-section bearings of the DRZ…C… series in inch dimensions are characterized in particular by their small cross-sections and low weight, which allows these bearing variants to be used in weight-saving and space-optimized designs.

This bearing design accommodates both radial and axial forces from both directions and is versatile due to its low-friction, low-noise, and low-vibration operation.

In addition, our bearings are also available in a corrosion-resistant version.

In addition to the bearing models listed here, SBN offers custom solutions tailored to your needs.
We’d be happy to advise you personally—please contact us!

General

In inches
Available in various tolerance classes (e.g., P0, P6, P5, P4)
Stainless steel versions are also available as an option
Small cross-sectional area relative to the bore diameter
Lightweight

Inner and outer rings

Through-hardened roller bearing steel with a very high degree of purity for a longer service life
High-precision raceways for optimal friction and noise performance

Rolling elements

Precision balls made of high-purity, through-hardened roller bearing steel for smooth operation; alternatively, made of ceramic (electrically insulated hybrid bearings)

Gaskets / Cover Plates

Open design with a sliding seal
Seals made of sheet steel-reinforced NBR
Other application-specific seal options (e.g., PTFE/Teflon) are available upon request

Cage

Made of brass, nylon, or phenolic resin, as required
Other cage models available upon request

Lubricant

Available in greased and oiled versions
More than 200 lubricants are available for application-specific solutions

Examples of Use

Antenna Mounting (Parabolic)
Semiconductor Industry
Food Technology
Aeronautical Engineering
Medical Technology

Double-row thin-section angular contact ball bearings of the 30/… and 38/… series are characterized in particular by their small cross-sections and low weight, which makes it possible to use these bearing variants to create weight-saving and space-optimized designs.

Their design corresponds to that of two single-row angular contact ball bearings in an O-configuration, but they require less axial space than those bearings.
Double-row thin-section angular contact ball bearings accommodate both radial and axial forces from both directions as well as tilting moments and provide a relatively rigid bearing arrangement.

In addition, our bearings are also available in corrosion-resistant versions.
You can find the corresponding product selection in the “Stainless Steel Roller Bearings” section.

In addition to the bearing models listed here, SBN offers custom solutions tailored to your needs.
We’d be happy to advise you personally—please contact us!

General

Tolerances according to DIN 620, Tolerance Class PN
Higher accuracy classes (e.g., P6, P5) available upon request
Bearing Clearance C2 to C3
Small cross-sectional area relative to the bore diameter
Lightweight
Pressure angle: 25° (may vary for certain bearing sizes)

Inner and outer rings

Through-hardened roller bearing steel with a very high degree of purity for a longer service life
High-precision raceways for optimal friction and noise performance
Additional options (e.g., coatings, carbonitriding, custom dimensions) available upon request

Rolling elements

Precision balls made of high-purity, fully hardened rolling-element bearing steel for smooth operation; alternatively, made of ceramic (electrically insulated hybrid bearings)

Gaskets / Cover Plates

Open design, with a non-abrasive cover plate (2Z), with a non-abrasive seal (2RU or LLB), and with an abrasive seal (2RS or LLU/LLUX)
Cover plates are made of sheet steel, and gaskets are made of sheet steel-reinforced NBR
Application-specific seal options available upon request

Cage

Made of steel or glass-fiber-reinforced plastic, as required
Other cage models available upon request

Lubricant

Available in greased and oiled versions
Standard grease: S001 | Standard oil: S901
More than 200 lubricants are available for application-specific solutions

Examples of Use

Robotics
Food Technology
Medical Technology
Measurement Technology
Space and Aviation

Thin-section angular contact ball bearings of the 718… and 719… series are characterized in particular by their small cross-sections and low weight, which allow these bearing variants to be used in weight-saving and space-optimized designs.

Angular contact ball bearings are single-row bearings with a pronounced contact angle that can support not only radial forces but also axial loads in one direction.
A radial load always generates an axial force component that must be supported by a mating bearing.
The bearing clearance in single-row angular contact ball bearings is determined only upon installation and depends on the alignment relative to the mating bearing.
Instead of a single bearing arrangement, paired bearing assemblies in O or X configurations with application-specific preload are also available.

O-arrangement (DB suffix):

An O-configuration allows for a large support span and thus provides a highly rigid bearing arrangement. To achieve the factory-set preload, the inner rings must be firmly clamped together on the shaft.

X-arrangement (suffix DF):

An X-arrangement allows for a small support distance and thus a less rigid mounting. To a limited extent, this can compensate for angular misalignment between the shaft and the housing. To achieve the factory-set values, the outer rings must be firmly clamped against each other within the housing.

Dynamic load capacity of a bearing assembly:

Cges = i0.7 × C (single bearing), where i = number of bearings

Static load capacity of a bearing assembly:

C0ges = 2 × C0 single bearing

Limit speed of a bearing group:

nGges = 0.85 × nGE single bearing

In addition to the bearing models listed here, SBN offers custom solutions tailored to your needs.
We’d be happy to advise you personally—please contact us!

General

Tolerances according to DIN 620, tolerance class PN/P0
Higher accuracy classes (e.g., P6, P5) available upon request
Small cross-sectional area relative to the bore diameter
Lightweight
Pressure angle, Series 718…: 30° (may vary for certain bearing sizes)
Pressure angle, Series 719…: 25° (may vary for certain bearing sizes)
They can also be supplied as bearing pairs in O and X configurations (suffixes: “DB” and “DF,” respectively) with application-specific preload

Inner and outer rings

Through-hardened roller bearing steel with a very high degree of purity for a longer service life
High-precision raceways for optimal friction and noise performance
Additional options (e.g., coatings, carbonitriding, custom dimensions) available upon request

Rolling elements

Precision balls made of high-purity, fully hardened rolling-element bearing steel for smooth operation; alternatively, made of ceramic (electrically insulated hybrid bearings)

Gaskets / Cover Plates

Open design, with a non-abrasive cover plate (2Z), with a non-abrasive seal (2RU or LLB), and with an abrasive seal (2RS or LLU/LLUX)
Cover plates are made of sheet steel, and gaskets are made of sheet steel-reinforced NBR
Application-specific seal options available upon request

Cage

Fiber-reinforced plastic
Other cage models available upon request

Lubricant

Available in greased and oiled versions
Standard grease: S001 | Standard oil: S901
More than 200 lubricants are available for application-specific solutions

Examples of Use

Swivel Bearing
Transmission
Robotics
Food Technology
Medical Technology
Measurement Technology
Space and Aviation

Thin-section angular contact ball bearings of the DRZ…A… series in inch sizes are characterized in particular by their small cross-sections and low weight, which make it possible to create weight-saving and space-optimized designs using these bearing variants.

Angular contact ball bearings are single-row bearings with a pronounced contact angle that can accommodate not only radial forces but also axial loads in one direction.
When subjected to a radial load, an axial force component is always generated, which must be supported by a mating bearing.

Instead of single bearings, paired bearings are also available in O, X, or tandem configurations. In this case, the bearing rings are ground so that a slight axial preload is applied to the bearing under rated conditions.

In addition, our bearings are also available in a corrosion-resistant version.

In addition to the bearing models listed here, SBN offers custom solutions tailored to your needs.
We’d be happy to advise you personally—please contact us!

General

In inches
Available in various tolerance classes (e.g., P0, P6, P5, P4)
Stainless steel versions are also available as an option
Small cross-sectional area relative to the bore diameter
Lightweight
Can also be supplied as bearing sets in O, X, and tandem configurations

Inner and outer rings

Through-hardened roller bearing steel with a very high degree of purity for a longer service life
High-precision raceways for optimal friction and noise performance

Rolling elements

Precision balls made of high-purity, fully hardened rolling-element bearing steel for smooth operation; alternatively, made of ceramic (electrically insulated hybrid bearings)

Gaskets / Cover Plates

Open design with a sliding seal
Seals made of sheet steel-reinforced NBR
Other application-specific seal options (e.g., PTFE/Teflon) are available upon request

Cage

Made of brass, nylon, or phenolic resin, as required
Other cage models available upon request

Lubricant

Available in greased and oiled versions
More than 200 lubricants are available for application-specific solutions

Examples of Use

Antenna Mounting (Parabolic)
Semiconductor Industry
Food Technology
Aviation Engineering
Medical Technology

Q18… series thin-section four-point bearings are particularly notable for their small cross-sections and low weight, which make it possible to use these bearing variants to create weight-saving and space-optimized designs.

Four-point bearings are a special type of single-row angular contact ball bearing. They function in the same way as double-row angular contact ball bearings but require less axial space.

In cross-section, the raceways of the outer and inner rings consist of pointed arches, which create the pressure angle and the four-point contact that gives the bearing its name.

This bearing design can accommodate high axial forces in both directions as well as low radial loads.

In addition to the bearing models listed here, SBN offers custom solutions tailored to your needs.
We would be happy to advise you personally—please contact us!

General

Tolerances according to DIN 620, Tolerance Class PN/P0
Bearing Air CN
Additional bearing clearance classes available upon request
Small cross-sectional area relative to the bore diameter
Lightweight
Print angle: 30° (typically)

Inner and outer rings

Through-hardened roller bearing steel with a very high degree of purity for a longer service life
Other materials available upon request
High-precision raceways for optimal friction and noise performance

Rolling elements

Precision balls made of high-purity, fully hardened roller bearing steel for smooth operation

Gaskets / Cover Plates

Open design

Cage

Fiber-reinforced plastic

Lubricant

Oiled/Preserved
More than 200 lubricants are available for application-specific solutions

Examples of Use

Filling Systems
Food Technology
Medical Technology
Measurement Technology
Space and Aviation
X-ray machines
Slip Rings

DRZ…X… series thin-section four-point bearings in inch sizes are characterized in particular by their small cross-sections and low weight, which allows these bearing variants to be used in weight-saving and space-optimized designs.

Four-point bearings are a special type of single-row angular contact ball bearing. They function in the same way as double-row angular contact ball bearings but require less axial space.

In cross-section, the raceways of the outer and inner rings consist of pointed arches, which create the pressure angle and the four-point contact that gives the bearing its name.

This bearing design can withstand high axial forces in both directions, tilting moments, and low radial loads.

In addition, our bearings are also available in a corrosion-resistant version.

In addition to the bearing models listed here, SBN offers custom solutions tailored to your needs.
We would be happy to advise you personally—please contact us!

General

In inches
Available in various tolerance classes (e.g., P0, P6, P5, P4)
Stainless steel versions are also available as an option
Small cross-sectional area relative to the bore diameter
Lightweight

Inner and outer rings

Through-hardened roller bearing steel with a very high degree of purity for a longer service life
High-precision raceways for optimal friction and noise performance

Rolling elements

Precision balls made of high-purity, through-hardened roller bearing steel for smooth operation; alternatively, ceramic balls (electrically insulated hybrid bearings)

Gaskets / Cover Plates

Open design with a sliding seal
Seals made of sheet steel-reinforced NBR
Other application-specific seal options (e.g., PTFE/Teflon) are available upon request

Cage

Made of brass, nylon, or phenolic resin, as required
Other cage designs available upon request

Lubricant

Available in greased and oiled versions
More than 200 lubricants are available for application-specific solutions

Examples of Use

Antenna Mounting (Parabolic)
Semiconductor Industry
Food Technology
Aeronautical Engineering
Medical Technology

The DRXM… series of stainless steel split thin-ring four-point bearingsVA are single-row ball bearings consisting of a split inner ring and a split outer ring, with a ring cross-section of 4.5 mm regardless of the bore diameter.

The split bearing rings allow for the use of a roller-guided plastic cage with more and larger balls, thereby achieving higher static and dynamic load capacities.
The 90° contact angle enables this bearing variant to accommodate radial and axial loads on both sides, as well as tilting moments.

The rings and rolling elements are made of stainless steel, which offers excellent corrosion resistance. The ball cage band is made of plastic.
The bearings can be used in a temperature range from -40 °C to +100 °C. For higher temperatures, an alternative cage material is recommended.

In addition to the bearing models listed here, SBN offers custom solutions tailored to your needs.
We would be happy to advise you personally—please contact us!

General

Are they also offered in accordance with the metric system?
Additional intermediate sizes available upon request
Continuous operation: -40 °C to +100 °C; briefly up to +120 °C
Print angle: 90°
Radial and axial loads on both sides, as well as tilting moments, are absorbed

Inner and outer rings

Uniform ring cross-section of 4.5 mm (regardless of the bore diameter)
Made of corrosion-resistant steel

Rolling elements

Precision balls made of corrosion-resistant steel for smooth operation; alternatively, ceramic balls (electrically insulated hybrid bearings)

Gaskets / Cover Plates

Open design

Cage

Made of corrosion-resistant steel or glass-fiber-reinforced plastic, as required
Other cage designs (e.g., PEEK, PTFE/Teflon) are available upon request

Lubricant

Available in greased and oiled versions
More than 200 lubricants are available for application-specific solutions

Examples of Use

Antenna Mounting (Parabolic)
Food Technology
Medical Technology

The stainless steel split thin-ring four-point bearings in inch sizes of the DRXZ…VA, DRAZ…VA, DRCZ…VA, and DRXD…VA, these are single-row ball bearings consisting of a split inner ring and a split outer ring, and—regardless of the bore diameter—they have a ring cross-section of 3.175 mm (DRXZ), 6.350 mm (DRAZ), 9.525 mm (DRCZ), and 12.700 mm (DRXD), respectively, regardless of the bore diameter.

The split bearing rings allow for the use of a roller-guided plastic cage with more and larger balls, thereby achieving higher static and dynamic load capacities.
The 90° contact angle enables this bearing variant to accommodate radial and axial loads on both sides, as well as tilting moments.

The rings and rolling elements are made of stainless steel, which offers excellent corrosion resistance. The ball cage is made of plastic.
The bearings can be used in a temperature range from -40 °C to +100 °C. For higher temperatures, an alternative cage material is recommended.

In addition to the bearing models listed here, SBN offers custom solutions tailored to your needs.
We would be happy to advise you personally—please contact us!

General

In inches
Are they also offered in accordance with the metric system?
Additional intermediate sizes available upon request
Continuous operation: -40 °C to +100 °C; briefly up to +120 °C
Print angle: 90°
Radial and axial loads on both sides, as well as tilting moments, are absorbed

Inner and outer rings

Standard ring cross-section of 3.175 mm (DRXZ), 6.350 mm (DRAZ), 9.525 mm (DRCZ), and 12.700 mm (DRXD), respectively
Made of corrosion-resistant steel

Rolling elements

Precision balls made of corrosion-resistant steel for smooth operation; alternatively, ceramic balls (electrically insulated hybrid bearings)

Gaskets / Cover Plates

Open design

Cage

Made of corrosion-resistant steel or glass-fiber-reinforced plastic, as required
Other cage materials (e.g., PEEK, PTFE/Teflon) are available upon request

Lubricant

Available in greased and oiled versions
More than 200 lubricants are available for application-specific solutions

Examples of Use

Antenna Mounting (Parabolic)
Food Technology
Medical Technology

KRL… series cross-roller bearings consist of an outer ring, an inner ring, and cylindrical rollers arranged in a cross pattern, which are separated from one another by plastic spacers.

Because the rolling elements are arranged in a cross pattern, this bearing design can accommodate high radial and axial forces from both directions, as well as tilting moments. This makes it possible to reduce conventional design solutions with two bearing locations to just one.

KRL… Crossed-roller bearings, which are suitable for applications involving both inner ring and outer ring rotation, are characterized in particular by their small cross-sections and low weight, enabling the creation of rigid, weight-saving, and space-optimized designs.

In addition to the bearing models listed here, SBN offers custom solutions tailored to your needs.
We would be happy to advise you personally—please contact us!

General

Tolerance Class PN/P0
Higher accuracy classes (e.g., P6, P5, P4) available upon request
Small cross-sectional area relative to the bore diameter
Optionally preloaded (S1) or with slight play (C1)

Inner and outer rings

Through-hardened roller bearing steel with a very high degree of purity for a longer service life

Rolling elements

Cross-arranged cylindrical rollers made of case-hardened, high-purity rolling-bearing steel for smooth operation

Gaskets / Cover Plates

Open design with a sliding seal (UU)

Spacers

Made of plastic
They hold the rolling elements in the correct position, thereby preventing the cylindrical rollers from tilting
Also available in a fully-rolled version (VR)

Lubricant

Bearings are lubricated by default with a high-quality roller bearing grease designed for heavy loads, extreme pressures, and a wide temperature range.

Examples of Use

Machining Centers
Rotary Tables
Medical Technology
Measurement Technology
Robotics

KRLC… series cross-roller bearings consist of a split outer ring, an inner ring, and cylindrical rollers arranged in a cross pattern, which are separated from one another by plastic spacers.

This bearing design represents the basic variant of the cross-roller bearing product group and, due to the cross-arranged rolling elements, can accommodate high radial and axial forces in both directions as well as tilting moments.
This allows conventional design solutions with two bearing locations to be reduced to a single one.

Furthermore, the KRLC… cross-roller bearings are characterized by a very compact design and very high running accuracy of the inner ring.
However, due to the split outer ring, this bearing variant is suitable only for applications involving inner ring rotation.

In addition to the bearing models listed here, SBN offers custom solutions tailored to your needs.
We would be happy to advise you personally—please contact us!

General

Tolerance Class PN/P0
Higher accuracy classes (e.g., P6, P5, P4) available upon request
Optionally preloaded (S1) or with slight play (C1)

Inner and outer rings

Through-hardened roller bearing steel with a very high degree of purity for a longer service life
Split outer ring (the two halves are screwed together axially)

Rolling elements

Cross-arranged cylindrical rollers made of case-hardened, high-purity rolling-bearing steel for smooth operation

Gaskets / Cover Plates

Open design with a sliding seal (UU)

Spacers

Made of plastic
They hold the rolling elements in the correct position, thereby preventing the cylindrical rollers from tilting
Also available in a fully-rolled version (VR)

Lubricant

Bearings are lubricated by default with a high-quality roller bearing grease designed for heavy loads, extreme pressures, and a wide temperature range.

Examples of Use

Medical Technology
Measurement Technology
Robotics
Rotary Indexing Tables
Machine Tools

KRLF… series cross-row roller bearings consist of an outer ring, an inner ring, and cylindrical rollers arranged in a cross pattern, which are separated from one another by plastic spacers.

The inner and outer rings, which are manufactured from a single piece, are provided with mounting holes, eliminating the need for a mounting flange or housing. Consequently, this facilitates easy installation and reduces the impact of potential installation errors, thereby ensuring that the KRLF cross-roller bearings perform at their optimal level.

Due to the cross-arranged rolling elements, this bearing design can accommodate high radial and axial forces from both directions, as well as tilting moments. This allows conventional designs with two bearing locations to be reduced to a single one.
Furthermore, this compact design is characterized by high rigidity and high running accuracy and is suitable for applications involving both inner ring and outer ring rotation.

In addition to the bearing models listed here, SBN offers custom solutions tailored to your needs.
We would be happy to advise you personally—please contact us!

General

Tolerance Class PN/P0
Higher accuracy classes (e.g., P6, P5, P4) available upon request
Optionally preloaded (S1) or with slight play (C1)

Inner and outer rings

Through-hardened roller bearing steel with a very high degree of purity for a longer service life
Equipped with mounting holes, which make installation easy

Rolling elements

Cross-arranged cylindrical rollers made of case-hardened, high-purity rolling-bearing steel for smooth operation

Gaskets / Cover Plates

Open design with a sliding seal (UU)

Spacers

Made of plastic
They hold the rolling elements in the correct position, thereby preventing the cylindrical rollers from tilting
Also available in a fully-rolled version (VR)

Lubricant

Bearings are lubricated by default with a high-quality roller bearing grease designed for heavy loads, extreme pressures, and a wide temperature range.

Examples of Use

Machining Centers
Rotary Tables
Medical Technology
Measurement Technology
Robotics

Crossed-roller bearings of the KRLH… series consist of an outer ring, an inner ring, and cylindrical rollers arranged in a crossed pattern, which are separated from one another by plastic spacers.

Because the rolling elements are arranged in a cross pattern, this bearing design can accommodate high radial and axial forces from both directions, as well as tilting moments. This makes it possible to reduce conventional design solutions with two bearing locations to just one.

Furthermore, this compact design is characterized by high rigidity and high running accuracy, and is suitable for applications involving both inner-ring and outer-ring rotation.

In addition to the bearing models listed here, SBN offers custom solutions tailored to your needs.
We would be happy to advise you personally—please contact us!

General

Tolerance Class PN/P0
Higher accuracy classes (e.g., P6, P5, P4) available upon request
Optionally preloaded (S1) or with slight play (C1)

Inner and outer rings

Through-hardened roller bearing steel with a very high degree of purity for a longer service life

Rolling elements

Cross-arranged cylindrical rollers made of case-hardened, high-purity rolling-bearing steel for smooth operation

Gaskets / Cover Plates

Open design with a sliding seal (UU)

Spacers

Made of plastic
They hold the rolling elements in the correct position, thereby preventing the cylindrical rollers from tilting
Also available in a fully-rolled version (VR)

Lubricant

Bearings are lubricated by default with a high-quality roller bearing grease designed for heavy loads, extreme pressures, and a wide temperature range.

Examples of Use

Machining Centers
Rotary Tables
Medical Technology
Measurement Technology
Robotics

Single-row deep-groove ball bearings in the 60… 62… and 63… series are the most commonly used bearing types and are employed in a variety of applications.

This bearing design accommodates both radial and axial forces from both directions and is versatile due to its low-friction, low-noise, and low-vibration operation.

In addition, our bearings are also available in corrosion-resistant versions.
You can find the corresponding product selection in the “Stainless Steel Roller Bearings” section.

In addition to the bearing models listed here, SBN offers custom solutions tailored to your needs.
We’d be happy to advise you personally—please contact us!

General

Tolerances according to DIN 620, tolerance class PN/P0
Higher accuracy classes (e.g., P6, P5) available upon request
Bearing clearances C2 through C5 and custom bearing clearances available
Also available in inch measurements

Inner and outer rings

Through-hardened roller bearing steel with a very high degree of purity for a longer service life
High-precision raceways for optimal friction and noise characteristics
Additional options (e.g., coatings, carbonitriding, custom dimensions) are available upon request

Rolling elements

Precision balls made of high-purity, through-hardened roller bearing steel for smooth operation; alternatively, made of ceramic (electrically insulated hybrid bearings)

Gaskets / Washer Discs

Open design, with a non-abrasive cover plate (2Z), with a non-abrasive seal (LLB or 2RU), and with an abrasive seal (LLU/LLUX or 2RS)
Cover plates are made of sheet steel, and gaskets are made of sheet steel-reinforced NBR; alternatively, they can also be made of FKM/Viton
Application-specific seal options (e.g., PTFE/Teflon) available upon request

Cage

Made of steel or glass-fiber-reinforced plastic, as required; alternatively, made of heavy-duty fabric
Other cage materials (e.g., brass, PEEK) are available upon request

Lubricant

Available in greased and oiled versions
Standard grease: S001 | Standard oil: S901
More than 200 lubricants are available for application-specific solutions

Examples of Use

Electric Motors
Household appliances
Compressors
Power Tools
Pumps

Ball bearings in the OL 60…, OL 62…, and OL 63… series can be used in high-temperature applications up to 350 °C thanks to a special heat treatment, a manganese phosphate coating, and special lubricants.

This bearing design accommodates both radial and axial forces from both directions, but is suitable only for low rotational speeds.

For deep-groove ball bearings used as furnace bearings, the bearing clearance is generally in the range of C4–C5 to compensate for thermal expansion.

There are two temperature classes:

A high-temperature grease is used at operating temperatures up to 270 °C.
An MoS2 lubricant is used at operating temperatures ranging from 270 °C to 350 °C.

In addition to the bearing models listed here, SBN offers custom solutions tailored to your needs.
We’d be happy to advise you personally—please contact us!

General

Tolerances according to DIN 620, Tolerance Class PN
Higher accuracy classes available upon request
Bearing clearance is typically C4 to C5 to compensate for thermal expansion
Special bearing air on request

Inner and outer rings

Heat-treated rolling bearing steel with a very high degree of purity for a longer service life
Manganese phosphate coating for enhanced corrosion protection, good lubricant adhesion, and optimized running characteristics

Rolling elements

Precision balls made of high-purity, heat-treated rolling-element bearing steel for smooth operation

Gaskets / Washer Discs

In an open design or with a non-abrasive cover wheel (2Z)
Cover plates are made of sheet steel

Cage

Sheet steel cage
Other cage models available upon request

Lubricant

Operating temperature up to 270 °C: High-temperature grease
Operating temperature: 270 °C to 350 °C: MoS2 lubricant

Examples of Use

Hardening Furnaces
Tunnel Furnaces (Continuous Furnaces)

Deep-groove ball bearings of the 60… LLU FA125.6 A, 62… LLU FA125.6 A, and 63… LLU FA125.6 A are suitable for applications requiring enhanced corrosion protection thanks to their Corrotect® coating (CrVI-free zinc-iron coating with passivation, coating thickness 2–5 µm).

The special Corrotect® coating exhibits excellent resistance to moisture, dirty water, salt spray, and mildly alkaline and mildly acidic cleaning agents, and provides all-around corrosion protection (including on the machined surfaces of the chamfers and radii).

This bearing design accommodates both radial and axial forces from both directions and is highly versatile due to its low-friction, low-noise, and low-vibration operation.
Uncoated bearings of the same design can be easily replaced with coated ones without any loss of load-carrying capacity.

In addition to the bearing models listed here, SBN offers custom solutions tailored to your needs.
We’d be happy to advise you personally—please contact us!

General

Tolerances according to DIN 620, tolerance class PN/P0
Higher accuracy classes (e.g., P6, P5) available upon request
Bearing clearances C2 through C5 and custom bearing clearances available

Inner and outer rings

Through-hardened roller bearing steel with a very high degree of purity for a longer service life
High-precision raceways for optimal friction and noise characteristics
Corrotect® coating (CrVI-free zinc-iron coating with passivation, film thickness 2–5 µm) for all-around corrosion protection
Other options (e.g., carbonitriding, custom dimensions) are available upon request

Rolling elements

Precision balls made of high-purity, through-hardened roller bearing steel for smooth operation; alternatively, made of ceramic (electrically insulated hybrid bearings)

Gaskets / Washer Discs

Open-type design, with a non-abrasive seal (2RU or LLB) and with an abrasive seal (2RS or LLU/LLUX)
Seals are made of sheet steel-reinforced NBR
Application-specific seal options (e.g., FKM/Viton, PTFE/Teflon) available upon request

Cage

Sheet steel cage
Other cage models available upon request

Lubricant

Standard grease: S025 barium complex soap grease (DIN 51825-KP2N-20) with very good resistance to water and water vapor
More than 200 lubricants are available for application-specific solutions

Examples of Use

Cable Reel Storage
Cleaning Systems

The single-row deep-groove ball bearings of the 6…TBH series with a hard-fabric cage are particularly suitable for use in very high-speed applications that also require excellent run-out performance (e.g., centrifuges, textile spindles, dental equipment).

This bearing design accommodates both radial and axial forces from both directions and is highly versatile due to its low-friction, low-noise, and low-vibration operation.
The hard-fabric cage (phenolic resin reinforced with fabric, machined) is guided along the inner ring and is characterized by its high strength and dimensional stability.

In addition to the bearing models listed here, SBN offers custom solutions tailored to your needs.
We’d be happy to advise you personally—please contact us!

General

Tolerances according to DIN 620, tolerance class PN/P0
Other tolerance classes (e.g., P6, P5) are available upon request
Bearing clearances C2 through C5 and custom bearing clearances available

Inner and outer rings

Through-hardened roller bearing steel with a very high degree of purity for a longer service life
High-precision raceways for optimal friction and noise characteristics
Additional options (e.g., coatings, carbonitriding, custom dimensions) are available upon request

Rolling elements

Precision balls made of high-purity, through-hardened roller bearing steel for smooth operation; alternatively, made of ceramic (electrically insulated hybrid bearings)

Gaskets / Washer Discs

Open design, with a non-abrasive cover plate (2Z), with a non-abrasive seal (2RU or LLB), and with an abrasive seal (2RS or LLU/LLUX)
Cover plates are made of sheet steel, and gaskets are made of sheet steel-reinforced NBR
Application-specific seal options (e.g., FKM/Viton, PTFE/Teflon) available upon request

Cage

Fiber-reinforced cage (phenolic resin, fabric-reinforced, machined)
It is guided along the inner ring
High strength and dimensional stability
Suitable for high speeds

Lubricant

Available in greased and oiled versions
Standard grease: S007 consists of mineral oil, ester oil, and a lithium soap, and is suitable for high speeds
More than 200 lubricants are available for application-specific solutions

Examples of Use

Dental Equipment
Textile Spindles
Centrifuges

WAL 6… series deep-groove ball bearings are used to compensate for differences in thermal expansion between the bearing and the housing.

This bearing variant has the same dimensional limits as standard radial deep-groove ball bearings, with the exception that a high-polymer material (PA) with a high coefficient of thermal expansion is incorporated along the outer circumference of the outer ring.

A good fit is achieved between the mating surfaces of the polyamide rings and the housing, ensuring consistent performance over a wide temperature range; at elevated temperatures, this prevents the outer ring from shifting or rotating within the housing due to circumferential load.

Thermal compensation bearings absorb both radial and axial forces in both directions and are versatile due to their low-friction, low-noise, and low-vibration operation.

In addition to the bearing models listed here, SBN offers custom solutions tailored to your needs.
We’d be happy to advise you personally—please contact us!

General

Tolerances according to DIN 620, tolerance class PN/P0
Higher accuracy classes (e.g., P6, P5) available upon request
Bearing clearances C2 through C5 and custom bearing clearances available

Inner and outer rings

Through-hardened roller bearing steel with a very high degree of purity for a longer service life
High-precision raceways for optimal friction and noise characteristics
Polyamide rings along the outer circumference of the outer ring to compensate for differences in expansion between the bearing and the housing
Additional options (e.g., coatings, carbonitriding, custom dimensions) are available upon request

Polyamide Rings

They are made of high-polymer material (PA) and are inserted along the outer circumference of the outer ring
Compensate for differences in the expansion of the bearing and the housing
Prevents the outer ring from shifting or rotating within the housing
Operating temperature: -20 °C to +110 °C
The housing bore should be machined with a 15° to 30° chamfer to prevent damage to the polyamide rings.
A housing bore tolerance of G6 or G7 is recommended

Rolling elements

Precision balls made of high-purity, through-hardened roller bearing steel for smooth operation; alternatively, made of ceramic (electrically insulated hybrid bearings)

Gaskets / Washer Discs

Open design, with a non-abrasive face plate (2Z), with a non-abrasive seal (RU or LLB), and with an abrasive seal (2RS or LLU/LLUX)
Cover plates are made of sheet steel, and gaskets are made of sheet steel-reinforced NBR
Application-specific seal options (e.g., FKM/Viton, PTFE/Teflon) available upon request

Cage

Made of steel or glass-fiber-reinforced plastic, as required
Other cage models available upon request

Lubricant

Available in greased and oiled versions
Standard grease: S001 | Standard oil: S901
More than 200 lubricants are available for application-specific solutions

Examples of Use

Electric Motors
Compressors
Pumps

Light-duty 160… series deep-groove ball bearings are characterized in particular by their small cross-sections and low weight, which makes it possible to create weight-saving and space-optimized designs using this bearing type.

This bearing design accommodates both radial and axial forces from both directions and is versatile due to its low-friction, low-noise, and low-vibration operation.

In addition, our bearings are also available in corrosion-resistant versions.
You can find the corresponding product selection in the “Stainless Steel Roller Bearings” section.

In addition to the bearing models listed here, SBN offers custom solutions tailored to your needs.
We’d be happy to advise you personally—please contact us!

General

Tolerances according to DIN 620, tolerance class PN/P0
Higher accuracy classes (e.g., P6, P5) available upon request
Bearing clearances C2 through C5 and custom bearing clearances available
Very small cross-sectional area relative to the bore diameter
Lightweight

Inner and outer rings

Through-hardened roller bearing steel with a very high degree of purity for a longer service life
High-precision raceways for optimal friction and noise characteristics
Other options (e.g., carbonitriding, custom dimensions) are available upon request

Rolling elements

Precision balls made of high-purity, through-hardened roller bearing steel for smooth operation; alternatively, made of ceramic (electrically insulated hybrid bearings)

Gaskets / Washer Discs

Open design, with a non-abrasive cover plate (2Z), with a non-abrasive seal (2RU or LLB), and with an abrasive seal (2RS or LLU/LLUX)
Cover plates are made of sheet steel, and gaskets are made of sheet steel-reinforced NBR
Application-specific seal options available upon request

Cage

Sheet steel cage
Other cage models available upon request

Lubricant

Available in greased and oiled versions
Standard grease: S001 | Standard oil: S901
More than 200 lubricants are available for application-specific solutions

Examples of Use

Medical Devices
Measuring Instruments

ORL 6… series deep-groove ball bearings are used in applications involving rotating loads (imbalance) to prevent fit rust caused by vibration, and are particularly suitable for applications where a sufficiently tight bearing fit in the housing bore cannot be achieved.

This bearing variant has the same dimensional limits as standard radial deep-groove ball bearings, with the exception that O-rings made of NBR (acrylonitrile-butadiene rubber) are installed along the outer circumference of the outer ring.

O-ring bearings absorb both radial and axial forces in both directions and are versatile due to their low-friction, low-noise, and low-vibration operation. Furthermore, they can also be used as non-locating bearings for axial length compensation, and the housing can generally be reused.

In addition to the bearing models listed here, SBN offers custom solutions tailored to your needs.
We’d be happy to advise you personally—please contact us!

General

Tolerances according to DIN 620, Tolerance Class PN
Higher accuracy classes (e.g., P6, P5) available upon request
Bearing clearances C2 through C5 and custom bearing clearances available

Inner and outer rings

Through-hardened roller bearing steel with a very high degree of purity for a longer service life
High-precision raceways for optimal friction and noise characteristics
O-rings along the outer circumference of the outer ring to prevent fit rust
Additional options (e.g., coatings, carbonitriding, custom dimensions) are available upon request

O-rings

They are made of NBR (acrylonitrile-butadiene rubber) and are installed along the outer circumference of the outer ring.
Help prevent surface rust
Continuous operating temperature: -25 °C to +100 °C
Maximum permissible operating temperature for short periods: +120 °C
The housing bore should be provided with a 15° to 30° chamfer to prevent damage to the O-rings.
A housing bore tolerance of G6 or G7 is recommended

Rolling elements

Precision balls made of high-purity, through-hardened roller bearing steel for smooth operation; alternatively, made of ceramic (electrically insulated hybrid bearings)

Gaskets / Washer Discs

Open design, with a non-abrasive face plate (2Z), with a non-abrasive seal (RU or LLB), and with an abrasive seal (2RS or LLU/LLUX)
Cover plates are made of sheet steel, and gaskets are made of sheet steel-reinforced NBR
Application-specific seal options (e.g., FKM/Viton, PTFE/Teflon) available upon request

Cage

Made of steel or glass-fiber-reinforced plastic, as required
Other cage models available upon request

Lubricant

Available in greased and oiled versions
Standard grease: S001 | Standard oil: S901
More than 200 lubricants are available for application-specific solutions

Examples of Use

Electric Motors
Compressors
Fan
Pumps

Stainless-steel deep-groove ball bearings of the 60…VA, 62…VA, and 63…VA series are used in a variety of applications where there is a risk of corrosion.

Stainless steel, which offers excellent corrosion resistance, is used for the rings, rolling elements, cages, and end plates. Abrasive and non-abrasive seals are made of sheet steel-reinforced NBR.

This bearing design accommodates both radial and axial forces from both directions and is versatile due to its low-friction, low-noise, and low-vibration operation.

In addition, our bearings are also available in chrome steel versions.
You can find the corresponding product selection in the "Chrome Steel Roller Bearings" section.

In addition to the bearing models listed here, SBN offers custom solutions tailored to your needs.
We’d be happy to advise you personally—please contact us!

General

Tolerances according to DIN 620, tolerance class PN/P0
Higher accuracy classes (e.g., P6, P5) available upon request
Bearing clearances C2 through C5 and custom bearing clearances available

Inner and outer rings

Made of corrosion-resistant steel
High-precision raceways for optimal friction and noise characteristics
Additional options (e.g., coatings, carbonitriding, custom dimensions) are available upon request

Rolling elements

Precision balls made of corrosion-resistant steel for smooth operation; alternatively, available in ceramic (electrically insulated hybrid bearings)

Gaskets / Washer Discs

Open design, with a non-abrasive cover plate (2Z), with a non-abrasive seal (2RU or LLB), and with an abrasive seal (2RS or LLU/LLUX)
Cover plates are made of corrosion-resistant steel, and gaskets are made of steel-reinforced NBR; alternatively, they can also be made of FKM/Viton
Application-specific seal options (e.g., PTFE/Teflon) available upon request

Cage

Made of corrosion-resistant steel or glass-fiber-reinforced plastic, as required
Other cage materials (e.g., brass, PEEK) are available upon request

Lubricant

Available in greased and oiled versions
Standard grease: S001 | Standard oil: S901
More than 200 lubricants are available for application-specific solutions

Examples of Use

Electric Motors
Food Technology
Medical Technology
Pumps
Packaging Machines

Stainless steel deep-groove ball bearings of the 6…NM series are made from the austenitic material AISI 304 (≈ V2A), offer higher corrosion resistance than standard stainless steel VA bearings, and are non-magnetic.

This bearing configuration accommodates both radial and axial forces from both directions; however, it is not suitable for high-load applications and/or situations requiring medium or high rotational speeds (the permissible load capacity and maximum speed are lower than those of conventional VA stainless steel bearings).

In addition, our bearings are also available in chrome steel versions.
You can find the corresponding product selection in the "Chrome Steel Roller Bearings" section.

In addition to the bearing models listed here, SBN offers custom solutions tailored to your needs.
We’d be happy to advise you personally—please contact us!

General

Tolerances according to DIN 620, tolerance class PN/P0
Bore tolerance: +0.050/0 mm
Outer Diameter Tolerance:
- D ≤ 30 mm: 0/- 0.030
- D ≤ 47 mm: 0/- 0.035
- D > 47 mm: 0/- 0.040
Made of AISI 304 austenitic material (≈ V2A) (higher corrosion resistance than standard VA stainless steel bearings)

Inner and outer rings

Made of corrosion-resistant AISI 304 (≈ V2A)
High-precision raceways for optimal friction and noise characteristics

Rolling elements

Precision balls made of corrosion-resistant AISI 304 (≈V2A) for smooth operation; alternatively, ceramic balls (electrically insulated hybrid bearings)

Gaskets / Washer Discs

Open-type design, with a non-abrasive cover plate (2Z) and an abrasive seal (2RS or LLU/LLUX)
Cover plates are made of corrosion-resistant AISI 304 steel (≈ V2A), and gaskets are made of sheet steel-reinforced NBR.

Cage

Made of corrosion-resistant AISI 304 (˜V2A) steel

Lubricant

Available in greased and oiled versions
More than 200 lubricants are available for application-specific solutions

Examples of Use

Food Technology
Semiconductor Manufacturing Equipment
Metal Coating Equipment
Cleaning Machines

Stainless steel deep-groove ball bearings for dry running in the 6…VA…TC2 series are primarily used in cleanrooms or vacuum environments and are characterized in particular by their good chemical resistance, abrasion resistance, and dry-running properties.

Stainless steel, which offers excellent corrosion resistance, is used for the rings, rolling elements, cages, and end plates. Furthermore, the cage is coated with a specially developed coating, and the sliding seals are made of steel-reinforced NBR.

This bearing design accommodates both radial and axial forces from both directions; however, the permissible radial loads and maximum speeds specified in the table must be observed to prevent surface damage.
Stainless-steel deep-groove ball bearings for dry running are suitable for ambient temperatures up to +300 °C (except for the 2RS variant) and do not require conventional lubrication with grease or oil.

In addition, our bearings are also available in chrome steel versions.

In addition to the bearing models listed here, SBN offers custom solutions tailored to your needs.
We’d be happy to advise you personally—please contact us!

General

Tolerances according to DIN 620, tolerance class PN/P0
Standard Bearing Air C4
Suitable for ambient temperatures up to +300 °C (except for the 2RS version)

Inner and outer rings

Made of corrosion-resistant steel
High-precision raceways for optimal friction and noise characteristics

Rolling elements

Precision balls made of corrosion-resistant steel for smooth operation; alternatively, available in ceramic (electrically insulated hybrid bearings)

Gaskets / Washer Discs

Open design, with a non-abrasive cover plate (2Z) and an abrasive seal (2RS)
Cover plates are made of corrosion-resistant steel, and gaskets are made of sheet steel-reinforced NBR; alternatively, they can also be made of FKM

Cage

Made of corrosion-resistant steel
Coated with a specially developed coating

Lubricant

Conventional lubrication with grease or oil is not required

Examples of Use

Semiconductor Industry
Vacuum Equipment

Stainless-steel deep-groove ball bearings with Viton (FKM) seals in the 60 2VS…VA, 62 2VS…VA, and 63 2VS…VA series are used in a variety of applications where there is a risk of corrosion.

Stainless steel, which is highly resistant to corrosion, is used for the rings, rolling elements, and cages. Sliding seals are made of FKM—fluorinated rubber (trade name: Viton)—and are characterized in particular by very high resistance to high temperatures (e.g., autoclaves) and chemicals (e.g., gasoline).

This bearing design accommodates both radial and axial forces from both directions and is versatile due to its low-friction, low-noise, and low-vibration operation.

In addition, our bearings are also available in chrome steel versions.
You can find the corresponding product selection in the "Chrome Steel Roller Bearings" section.

In addition to the bearing models listed here, SBN offers custom solutions tailored to your needs.
We’d be happy to advise you personally—please contact us!

General

Tolerances according to DIN 620, tolerance class PN/P0
Higher accuracy classes (e.g., P6, P5) available upon request
Bearing clearances C2 through C5 and custom bearing clearances available
Temperature range: approx. -30 °C to +230 °C

Inner and outer rings

Made of corrosion-resistant steel
High-precision raceways for optimal friction and noise characteristics
Additional options (e.g., coatings, carbonitriding, custom dimensions) are available upon request

Rolling elements

Precision balls made of corrosion-resistant steel for smooth operation; alternatively, available in ceramic (electrically insulated hybrid bearings)

Gaskets / Washer Discs

With a sliding seal (2VS)
Seals are made of FKM (Viton)
Application-specific seal options (e.g., PTFE/Teflon) available upon request

Cage

Made of corrosion-resistant steel or glass-fiber-reinforced plastic, as required
Other cage materials (e.g., brass, PEEK) are available upon request

Lubricant

Available in a greased version
More than 200 lubricants are available for application-specific solutions

Examples of Use

Electric Motors
Compressors
Pumps

Stainless steel deep-groove ball bearings of the XC…VA series are designed with an extended inner ring equipped with two set screws. This ensures easy installation and removal and prevents relative movement between the inner ring and the shaft.

Stainless steel, which is characterized by high corrosion resistance, is used for the rings, rolling elements, cages, and cover plates. Consequently, this bearing variant is used in a variety of applications where there is a risk of corrosion.

This bearing design accommodates both radial and axial forces from both directions and is versatile due to its low-friction, low-noise, and low-vibration operation.

In addition to the bearing models listed here, SBN offers custom solutions tailored to your needs.
We’d be happy to advise you personally—please contact us!

General

Tolerances according to DIN 620, tolerance class PN/P0
Bore tolerance:
- d ≤ 17 mm: 0/+0.0150 mm
- d > 17 mm: 0/+0.0180 mm

Inner and outer rings

Made of corrosion-resistant steel
High-precision raceways for optimal friction and noise characteristics

Rolling elements

Precision balls made of corrosion-resistant steel for smooth operation; alternatively, available in ceramic (electrically insulated hybrid bearings)

Gaskets / Washer Discs

Open-type design with a non-abrasive cover wheel (2Z)
Cover plates are made of corrosion-resistant steel

Cage

Made of corrosion-resistant steel

Lubricant

Available in greased and oiled versions
More than 200 lubricants are available for application-specific solutions

This bearing variant consists of single-row deep-groove ball bearings with inch-based dimensions, which are used in a variety of applications.

This bearing design accommodates both radial and axial forces from both directions and is versatile due to its low-friction, low-noise, and low-vibration operation.

In addition, our bearings are also available in chrome steel versions.
You can find the corresponding product selection in the "Stainless Steel Roller Bearings" section.

In addition to the bearing models listed here, SBN offers custom solutions tailored to your needs.
We’d be happy to advise you personally—please contact us!

General

Tolerances according to DIN 620, tolerance class PN/P0
Higher accuracy classes (e.g., P6, P5) available upon request
Bearing clearances C2 through C5 and custom bearing clearances available
Also available in metric sizes

Inner and outer rings

Through-hardened roller bearing steel with a very high degree of purity for a longer service life
High-precision raceways for optimal friction and noise characteristics
Additional options (e.g., coatings, carbonitriding, custom dimensions) are available upon request

Rolling elements

Precision balls made of high-purity, through-hardened roller bearing steel for smooth operation; alternatively, made of ceramic (electrically insulated hybrid bearings)

Gaskets / Washer Discs

Open design, with a non-abrasive cover plate (2Z), with a non-abrasive seal (LLB or 2RU), and with an abrasive seal (LLU/LLUX or 2RS)
Cover plates are made of sheet steel, and gaskets are made of sheet steel-reinforced NBR; alternatively, they can also be made of FKM/Viton
Application-specific seal options (e.g., PTFE/Teflon) available upon request

Cage

Made of steel or glass-fiber-reinforced plastic, as required; alternatively, made of heavy-duty fabric
Other cage materials (e.g., brass, PEEK) are available upon request

Lubricant

Available in greased and oiled versions
Standard grease: S001 | Standard oil: S901
More than 200 lubricants are available for application-specific solutions

Examples of Use

Electric Motors
Household appliances
Compressors
Power Tools
Pumps

Miniature angular contact ball bearings are single-row bearings with a pronounced contact angle that can accommodate not only radial forces but also axial loads in one direction.
A radial load always generates an axial force component that must be supported by a mating bearing.
The bearing clearance in single-row angular contact ball bearings is determined only upon installation and depends on the alignment with the mating bearing.

Instead of single bearings, paired bearings in O or X configurations with application-specific preload are also available.

O-arrangement (DB suffix):

An O-configuration allows for a large support distance and thus provides a highly rigid bearing arrangement. To achieve the factory-set preload, the inner rings must be tightly clamped against each other on the shaft.

X-arrangement (suffix DF):

An X-arrangement allows for a small support spacing and thus a less rigid mounting. To a limited extent, this can compensate for angular misalignment between the shaft and the housing. To achieve the factory-set values, the outer rings must be firmly clamped against each other within the housing.

The increasing miniaturization across a wide range of applications, coupled with rising demands on load-carrying capacity, precision, reliability, and service life, calls for a wide variety of possible bearing configurations.

Our miniature angular contact ball bearings can handle higher axial and/or radial loads than conventional miniature deep-groove ball bearings. In addition to their high precision, this bearing variant is characterized by its low deflection and high axial stiffness.

Dynamic load capacity of a bearing assembly:

Cges = i0.7 × C (single bearing), where i = number of bearings

Static load capacity of a bearing assembly:

C0ges = 2 × C0 (single bearing)

Limit speed of a bearing group:

nGges = 0.85 × nGE (single bearing)

In addition, our bearings are also available in corrosion-resistant versions. You can find the corresponding product selection in the “Stainless Steel Roller Bearings” section.

In addition to the bearing models listed here, SBN offers custom solutions tailored to your needs.
We would be happy to advise you personally—please contact us!

General

Tolerances according to DIN 620, Tolerance Class PN/P0
Tolerance class P5 for bearings with the suffix “MSS”
Pressure angle: 15°, 30°, or 45° (may vary for certain bearing sizes)
Other tolerance classes (e.g., P6, P5, P4) are available upon request
They can also be supplied as bearing pairs in O and X configurations (suffixes: “DB” and “DF,” respectively) with a specified preload
No risk of mix-ups during installation thanks to differently colored cover plates (silver on the outside = O configuration, copper on the outside = X configuration)

Inner and outer rings

Through-hardened roller bearing steel with a very high degree of purity for a longer service life
High-precision raceways for optimal friction and noise performance
Additional options (e.g., coatings, carbonitriding, custom dimensions) are available upon request

Rolling elements

Precision balls made of high-purity, through-hardened rolling-element bearing steel for smooth operation; alternatively, made of ceramic (electrically insulated hybrid bearings)

Gaskets / Cover Plates

Open design, with a non-abrasive cover plate (2Z) and an abrasive seal (2RS or LLU/LLUX)
Cover plates are made of sheet steel, and gaskets are made of sheet steel-reinforced NBR
Application-specific seal options available upon request

Cage

Fiber-reinforced plastic, POM (vacuum-compatible) for bearings with the suffix “MSS”
Other cage designs available upon request

Lubricant

Available in greased and oiled versions
More than 200 lubricants are available for application-specific solutions

Examples of Use

Drives
Automated Assembly
Aerospace Engineering
Measurement Technology
Medical Technology
Robotic Automation
Worm gear
Spindle Bearing

Stainless-steel HNS miniature angular contact ball bearings are used in a variety of applications where there is a risk of corrosion.
This bearing design consists of single-row bearings with a pronounced contact angle that can accommodate not only radial forces but also axial loads in one direction.
Under radial loading, an axial force component is always generated, which must be supported by a mating bearing.
The bearing clearance in single-row angular contact ball bearings is determined only upon installation and depends on the alignment with the mating bearing.

Instead of single bearings, paired bearings in O or X configurations with application-specific preload are also available.

O-arrangement (DB suffix):

An O-configuration allows for a large support distance and thus provides a highly rigid bearing arrangement. To achieve the factory-set preload, the inner rings must be tightly clamped against each other on the shaft.

X-arrangement (suffix DF):

An X-arrangement allows for a small support spacing and thus a less rigid mounting. To a limited extent, this can compensate for angular misalignment between the shaft and the housing. To achieve the factory-set values, the outer rings must be firmly clamped against each other within the housing.

The increasing miniaturization across a wide range of applications, coupled with rising demands on load-carrying capacity, precision, reliability, and service life, calls for a wide variety of possible bearing configurations.

Our miniature angular contact ball bearings can handle higher axial and/or radial loads than conventional miniature deep-groove ball bearings. In addition to their high precision, this bearing variant is characterized by its low deflection and high axial stiffness.

Dynamic load capacity of a bearing assembly:

Cges = i0.7 × C (single bearing), where i = number of bearings

Static load capacity of a bearing assembly:

C0ges = 2 × C0 (single bearing)

Limit speed of a bearing group:

nGges = 0.85 × nGE (single bearing)

In addition, our bearings are also available in chrome steel versions. You can find the corresponding product selection in the "Chrome Steel Rollers" section.

In addition to the bearing models listed here, SBN offers custom solutions tailored to your needs.
We would be happy to advise you personally—please contact us!

General

Tolerance class P5 for bearings with the suffix “MSS”
Other tolerance classes available upon request
Pressure angle: 45° (may vary for certain bearing sizes)
For bore diameters of 2 mm or larger, enabling extremely space-saving designs
They can also be supplied as bearing pairs in O and X configurations (suffixes: “DB” and “DF,” respectively) with a specified preload
No risk of mix-ups during installation thanks to differently colored cover plates (silver on the outside = O configuration, copper on the outside = X configuration)

Inner and outer rings

Made of corrosion-resistant, high-performance HNS (High Nitrogen Steel)
High-precision raceways for optimal friction and noise performance
Additional options (e.g., coatings, carbonitriding, custom dimensions) are available upon request

Rolling elements

Precision balls made of corrosion-resistant steel for smooth operation; alternatively, ceramic balls (electrically insulated hybrid bearings)

Gaskets / Cover Plates

In an open design or with a non-abrasive cover disc (2Z)
Cover plates are made of corrosion-resistant steel
Application-specific seal options available upon request

Cage

POM (vacuum-compatible) for bearings with the suffix “MSS”
Other cage designs available upon request

Lubricant

Available in greased and oiled versions
More than 200 lubricants are available for application-specific solutions

Examples of Use

Drives
Automated Assembly
Aerospace Engineering
Measurement Technology
Robotic Automation

Double-row miniature angular contact ball bearings (ball bearings with a bore diameter < 10 mm are classified as “miniature bearings”) of the 30/… series are constructed similarly to two single-row angular contact ball bearings in an O-arrangement, but require less axial space.
They accommodate both radial and axial forces from both directions as well as tilting moments and provide a relatively rigid bearing arrangement.

In addition to the bearing models listed here, SBN offers custom solutions tailored to your needs.
We would be happy to advise you personally—please contact us!

General

Tolerances according to DIN 620, Tolerance Class PN/P0
Higher accuracy classes (e.g., P6, P5) available upon request
Bearing clearances C2 through C3 and custom bearing clearances available
Pressure angle: 25° (may vary for certain bearing sizes)

Inner and outer rings

Through-hardened roller bearing steel with a very high degree of purity for a longer service life
High-precision raceways for optimal friction and noise performance
Additional options (e.g., coatings, carbonitriding, custom dimensions) are available upon request

Rolling elements

Precision balls made of high-purity, through-hardened rolling-element bearing steel for smooth operation; alternatively, made of ceramic (electrically insulated hybrid bearings)

Gaskets / Cover Plates

Open design, with a non-abrasive cover plate (2Z), with a non-abrasive seal (2RU or LLB), and with an abrasive seal (2RS or LLU/LLUX)
Cover plates are made of sheet steel, and gaskets are made of sheet steel-reinforced NBR
Application-specific seal options available upon request

Cage

Made of steel or glass-fiber-reinforced plastic, as required
Other cage materials available upon request

Lubricant

Available in greased and oiled versions
Standard Grease: S001 | Standard Oil: S901
More than 200 lubricants are available for application-specific solutions

Examples of Use

Drives
Automated Assembly
Aerospace Engineering
Measurement Technology
Robotic Automation

Double-row angular contact ball bearings of the 30…, 32…, 33…, and 38… series are designed to be equivalent to two single-row angular contact ball bearings in an O-arrangement, but require less axial space.

They absorb both radial and axial forces from both directions as well as tilting moments, and provide a relatively rigid support.

In addition, our bearings are also available in corrosion-resistant versions.
You can find the corresponding product selection in the "Stainless Steel Roller Bearings" section.

In addition to the bearing models listed here, SBN offers custom solutions tailored to your needs.
We would be happy to advise you personally—please contact us!

General

Tolerances according to DIN 620, tolerance class PN/P0
Higher accuracy classes (e.g., P6, P5) available upon request
Bearing clearances C2 through C3 and custom bearing clearances available
Pressure angle: 25° (may vary for certain bearing sizes)

Inner and outer rings

Through-hardened roller bearing steel with a very high degree of purity for a longer service life
High-precision raceways for optimal friction and noise characteristics
Additional options (e.g., coatings, carbonitriding, custom dimensions) are available upon request

Rolling elements

Precision balls made of high-purity, through-hardened rolling-bearing steel for smooth operation; alternatively, made of ceramic (electrically insulated hybrid bearings)

Gaskets / Cover Plates

Open design, with a non-abrasive cover plate (2Z), with a non-abrasive seal (2RU or LLB), and with an abrasive seal (2RS or LLU/LLUX)
Cover plates are made of sheet steel, and gaskets are made of sheet steel-reinforced NBR
Application-specific seal options available upon request

Cage

Made of steel or glass-fiber-reinforced plastic, as required
Other cage models available upon request

Lubricant

Available in greased and oiled versions
Standard grease: S001 | Standard oil: S901
More than 200 lubricants are available for application-specific solutions

Examples of Use

Material Handling
Compressors
Pumps
Packaging Machines

Stainless steel angular contact ball bearings of the 72…VA series are used in a variety of applications where there is a risk of corrosion.

Stainless steel, which is highly resistant to corrosion, is used for the rings and rolling elements. The sliding seals are made of sheet steel-reinforced NBR, and the cages are made of glass-fiber-reinforced plastic.

Angular contact ball bearings are single-row bearings with a pronounced contact angle that can accommodate not only radial forces but also axial loads in one direction.

A radial load always results in an axial force component, which must be supported by a mating bearing.
The bearing clearance in single-row angular contact ball bearings is determined by the installation and depends on the angle relative to the mating bearing.

Instead of single bearings, paired bearings in O or X configurations with application-specific preload are also available.

O-arrangement (DB suffix):

An O-configuration allows for a large support distance and thus provides a bearing arrangement with high rigidity. To achieve the factory-set preload, the inner rings must be firmly clamped against each other on the shaft.

X-arrangement (suffix DF):

An X-arrangement allows for a small support distance and thus a less rigid mounting. To a limited extent, this can compensate for angular misalignment between the shaft and the housing. To achieve the factory-set values, the outer rings must be firmly clamped against each other within the housing.

Dynamic load capacity of a bearing assembly:

Cges = i0.7 × C(single bearing), where i = number of bearings

Static load capacity of a bearing assembly:

C0ges = 2 × C0 single bearing

Limit speed of a bearing group:

nGges = 0.85 × nG (single bearing)

In addition, our bearings are also available in chrome steel versions.
You can find the corresponding product selection in the “Chrome Steel Roller Bearings” section.

In addition to the bearing models listed here, SBN offers custom solutions tailored to your needs.
We would be happy to advise you personally—please contact us!

General

Tolerances according to DIN 620, tolerance class PN/P0
Higher accuracy classes (e.g., P6, P5) available upon request
Pressure angle: 40° (may vary for certain bearing sizes)
They can also be supplied as bearing pairs in O and X configurations (suffixes: “DB” and “DF,” respectively) with application-specific preload

Inner and outer rings

Made of corrosion-resistant steel
High-precision raceways for optimal friction and noise characteristics

Rolling elements

Precision balls made of corrosion-resistant steel for smooth operation; alternatively, ceramic balls (electrically insulated hybrid bearings)

Gaskets / Cover Plates

Open design with a sliding seal (2RS or LLU/LLUX)
Seals are made of sheet steel-reinforced NBR
Application-specific seal options available upon request

Cage

Fiberglass-Reinforced Plastic

Lubricant

Available in greased and oiled versions
Standard grease: S001 | Standard oil: S901
More than 200 lubricants are available for application-specific solutions

Examples of Use

Material Handling
Compressors
Pumps
Packaging Machines

Stainless-steel double-row angular contact ball bearings of the 32…VA series are used in a variety of applications where there is a risk of corrosion.

Their design corresponds to that of two single-row angular contact ball bearings in an O-configuration, but they require less axial space.

Stainless steel, which is highly resistant to corrosion, is used for the rings, rolling elements, cages, and end plates. Abrasive and non-abrasive seals are made of sheet steel-reinforced NBR.

Double-row angular contact ball bearings accommodate both radial and axial forces from both directions as well as tilting moments, and provide a relatively rigid bearing arrangement.

In addition, our bearings are also available in chrome steel versions.
You can find the corresponding product selection in the “Chrome Steel Roller Bearings” section.

In addition to the bearing models listed here, SBN offers custom solutions tailored to your needs.
We would be happy to advise you personally—please contact us!

General

Tolerances according to DIN 620, tolerance class PN/P0
Higher accuracy classes (e.g., P6, P5) available upon request
Bearing clearances C2 through C3 and custom bearing clearances available
Pressure angle: 25° (may vary for certain bearing sizes)

Inner and outer rings

Made of corrosion-resistant steel
High-precision raceways for optimal friction and noise characteristics

Rolling elements

Precision balls made of corrosion-resistant steel for smooth operation; alternatively, ceramic balls (electrically insulated hybrid bearings)

Gaskets / Cover Plates

Open design, with a non-abrasive cover plate (2Z) and an abrasive seal (2RS or LLU/LLUX)
Cover plates are made of corrosion-resistant steel, and gaskets are made of sheet steel-reinforced NBR
Application-specific seal options available upon request

Cage

Made of corrosion-resistant steel or glass-fiber-reinforced plastic, as required
Other cage models available upon request

Lubricant

Available in greased and oiled versions
Standard grease: S001 | Standard oil: S901
More than 200 lubricants are available for application-specific solutions

Examples of Use

Material Handling
Compressors
Pumps
Packaging Machines

Angular contact ball bearings of the 72… and 73… series are single-row bearings with a pronounced contact angle that can accommodate not only radial forces but also axial loads in one direction.

A radial load always results in an axial force component, which must be supported by a mating bearing.
The bearing clearance in single-row angular contact ball bearings is determined by the installation and depends on the angle relative to the mating bearing.

Instead of single bearings, paired bearings in O or X configurations with application-specific preload are also available.

O-arrangement (DB suffix):

An O-configuration allows for a large support distance and thus provides a bearing arrangement with high rigidity. To achieve the factory-set preload, the inner rings must be firmly clamped against each other on the shaft.

X-arrangement (suffix DF):

An X-arrangement allows for a small support distance and thus a less rigid mounting. To a limited extent, this can compensate for angular misalignment between the shaft and the housing. To achieve the factory-set values, the outer rings must be firmly clamped against each other within the housing.

Dynamic load capacity of a bearing assembly:

Cges = i0.7 × C(single bearing), where i = number of bearings

Static load capacity of a bearing assembly:

C0ges = 2 × C0 single bearing

Limit speed of a bearing group:

nGges = 0.85 × nG (single bearing)

In addition, our bearings are also available in corrosion-resistant versions.
You can find the corresponding product selection in the "Stainless Steel Roller Bearings" section.

In addition to the bearing models listed here, SBN offers custom solutions tailored to your needs.
We would be happy to advise you personally—please contact us!

General

Tolerances according to DIN 620, tolerance class PN/P0
Higher accuracy classes (e.g., P6, P5) available upon request
Pressure angle: 40° (may vary for certain bearing sizes)
They can also be supplied as bearing pairs in O and X configurations (suffixes: “DB” and “DF,” respectively) with application-specific preload

Inner and outer rings

Through-hardened roller bearing steel with a very high degree of purity for a longer service life
High-precision raceways for optimal friction and noise characteristics
Additional options (e.g., coatings, carbonitriding, custom dimensions) are available upon request

Rolling elements

Precision balls made of high-purity, through-hardened rolling-bearing steel for smooth operation; alternatively, made of ceramic (electrically insulated hybrid bearings)

Gaskets / Cover Plates

Open design, with a non-abrasive cover plate (2Z) and an abrasive seal (2RS or LLU/LLUX)
Cover plates are made of sheet steel, and gaskets are made of sheet steel-reinforced NBR
Application-specific seal options available upon request

Cage

Made of steel or glass-fiber-reinforced plastic, as required
Other cage models available upon request

Lubricant

Available in greased and oiled versions
Standard grease: S001 | Standard oil: S901
More than 200 lubricants are available for application-specific solutions

Examples of Use

Material Handling
Mechanical lifting cylinder
Compressors
Pumps
Packaging Machines

Miniature axial deep-groove ball bearings consist of a shaft ring, a housing ring, and a set of balls held in place by a sheet-steel cage.
In bearing variants with the suffix “M,” both the shaft ring and the housing ring are equipped with a raceway. Versions without the suffix “M,” on the other hand, are manufactured without a raceway.

Miniature axial deep-groove ball bearings can accommodate high axial forces in one direction; however, radial loads and angular misalignment between the housing and the shaft are not permitted.

This design is a self-retaining bearing variant, which offers the advantage that the ball ring, shaft washer, and housing washer can be assembled separately.

In addition, our bearings are also available in corrosion-resistant versions.
You can find a selection of these products in the “Stainless Steel Roller Bearings” section.

In addition to the bearing models listed here, SBN offers custom solutions tailored to your needs.
We would be happy to advise you personally—please contact us!

General

Tolerances according to DIN 711, Tolerance Class PN/P0
Higher accuracy classes (e.g., P6, P5) available upon request

Inner and outer rings

Through-hardened roller bearing steel with a very high degree of purity for a longer service life
Additional options (e.g., coatings, carbonitriding, custom dimensions) are available upon request

Rolling elements

Precision balls made of high-purity, fully hardened roller bearing steel for smooth operation

Gaskets / Cover Plates

Available in an open design

Cage

Sheet steel cage

Examples of Use

Power Tools

Stainless-steel miniature axial deep-groove ball bearings consist of a shaft ring, a housing ring (each with a raceway), and a set of balls held in place by a cage.

The individual bearing components are made of stainless steel, which is characterized by high corrosion resistance; for this reason, these bearings are used in a variety of applications where there is a risk of corrosion.

Stainless-steel miniature axial deep-groove ball bearings can accommodate high axial forces in one direction; however, radial loads and angular misalignment between the housing and the shaft are not permitted.

This design is a self-retaining bearing variant, which offers the advantage that the ball ring, shaft washer, and housing washer can be assembled separately.

In addition, our bearings are also available in chrome steel versions.
You can find the corresponding product selection in the "Chrome Steel Roller Bearings" section.

In addition to the bearing models listed here, SBN offers custom solutions tailored to your needs.
We would be happy to advise you personally—please contact us!

General

Tolerances according to DIN 711, Tolerance Class PN/P0
Higher accuracy classes (e.g., P6, P5) available upon request

Inner and outer rings

Made of corrosion-resistant steel
Additional options (e.g., coatings, carbonitriding, custom dimensions) available upon request

Rolling elements

Precision balls made of corrosion-resistant steel for smooth operation

Gaskets / Cover Plates

Available in an open design

Cage

Made of corrosion-resistant steel

Examples of Use

Power Tools

Axial deep-groove ball bearings of the 511… and 512… series consist of a shaft ring, a housing ring (each with one raceway), and a set of balls held in place by a sheet-steel cage.

They can accommodate high axial forces in one direction; however, radial loads and angular misalignment between the housing and the shaft are not permitted.

This design is a non-self-retaining bearing variant, which offers the advantage that the ball ring, shaft washer, and housing washer can be installed separately from one another.

In addition, our bearings are also available in corrosion-resistant versions.
You can find the corresponding product selection in the "Stainless Steel Rollers" section.

In addition to the bearing models listed here, SBN offers custom solutions tailored to your needs.
We’d be happy to advise you personally—please contact us!

General

Tolerances according to DIN 711, tolerance class PN/P0
Higher accuracy classes (e.g., P6, P5) available upon request

Inner and outer rings

Through-hardened roller bearing steel with a very high degree of purity for a longer service life
Other models available upon request

Rolling elements

Precision balls made of high-purity, fully hardened roller bearing steel for smooth operation; alternatively, made of ceramic (electrically insulated hybrid bearings)

Gaskets / Cover Plates

Available in an open design

Cage

Sheet steel cage

Examples of Use

Drill spindle
Blower
Screw drive
Gripper
Pumps

Stainless-steel axial deep-groove ball bearings of the 511…VA and 512…VA series consist of a shaft ring, a housing ring (each with a raceway), and a set of balls held in place by a cage.

The individual bearing components are made of stainless steel, which is highly resistant to corrosion; for this reason, these bearings are used in a variety of applications where there is a risk of corrosion.

Stainless steel axial deep-groove ball bearings can accommodate high axial forces in one direction; however, radial loads and angular misalignment between the housing and the shaft are not permitted.

This design is a non-self-retaining bearing variant, which offers the advantage that the ball ring, shaft washer, and housing washer can be assembled separately from one another.

In addition, our bearings are also available in chrome steel versions.
You can find the corresponding product selection in the "Chrome Steel Roller Bearings" section.

In addition to the bearing models listed here, SBN offers custom solutions tailored to your needs.
We’d be happy to advise you personally—please contact us!

General

Tolerances according to DIN 711, tolerance class PN/P0
Higher accuracy classes (e.g., P6, P5) available upon request

Inner and outer rings

Made of corrosion-resistant steel
Other models available upon request

Rolling elements

Precision balls made of corrosion-resistant steel for smooth operation; alternatively, ceramic balls (electrically insulated hybrid bearings)

Gaskets / Cover Plates

Available in an open design

Cage

Made of corrosion-resistant steel

Examples of Use

Pumps
Blower
Clamping Tools

YRT… series axial-radial bearings combine two different designs in a single bearing that accommodates radial and axial loads on both sides, as well as tilting moments, without any play.

These precision bearings are primarily used in applications requiring high rigidity, precision, and running accuracy.

In addition to the bearing models listed here, SBN offers custom solutions tailored to your needs.
We would be happy to advise you personally—please contact us!

General

Tolerances according to DIN 496, tolerance class P5
Higher accuracy classes (e.g., P4) available upon request

Inner and outer rings

Through-hardened roller bearing steel with a very high degree of purity for a longer service life
High-precision raceways for optimal friction and noise performance
Other materials available upon request

Rolling elements

Precision rolling elements made of fully hardened, high-purity bearing steel for smooth operation

Gaskets / Cover Plates

Open design

Cage

Available in a greased version

Examples of Use

Rotary Tables
Milling Heads
Turning Clamp

Double-row miniature profile rollers of the LFR 50/… series are double-row angular contact ball bearings that accommodate radial and axial forces on both sides and are primarily used as rollers in conjunction with a shaft or a circular counter-running surface.

The outer ring, which is profiled as a Gothic arch, results in a two-point contact in the contact zone.
Hardened and ground shafts or support rails can also be provided upon request.

In addition to the bearing models listed here, SBN offers custom solutions tailored to your specific needs.
We’d be happy to advise you personally—please feel free to contact us!

General

Tolerances according to DIN 620

Inner and outer rings

Through-hardened roller bearing steel with a very high degree of purity for a longer service life
High-precision raceways for optimal friction and noise performance
The outer ring is shaped like a Gothic arch

Rolling elements

Precision balls made of high-purity, through-hardened rolling-element bearing steel for smooth operation

Gaskets / Cover Plates

In an open design or with a non-abrasive cover plate (2Z)
Cover plates are made of sheet steel

Cage

Made of glass-fiber-reinforced plastic

Lubricant

Available in a greased version
More than 200 lubricants are available for application-specific solutions

The PUR…VA series of stainless polyurethane rollers are high-precision, corrosion-resistant miniature deep-groove ball bearings with an overmolded polyurethane coating on the outer ring, designed for demanding applications that require high precision, low vibration, and low noise.

The heat-sealed polyurethane coating (hardness: HS90±3) is directly bonded to the outer ring, has a precisely ground surface, and is suitable for operating temperatures ranging from -30 °C to +70 °C.

In addition to the bearing models listed here, SBN offers custom solutions tailored to your needs.
We would be happy to advise you personally—please contact us!

General

Other configurations available upon request

Inner and outer rings

Made of corrosion-resistant steel
High-precision raceways for optimal friction and noise performance
The concentricity of the outer ring is 0.05 mm
Bore tolerance according to DIN 620 in PN
Outer diameter tolerance: ±0.05 mm
Width tolerance ±0.2 mm
Outer ring overmolded with a polyurethane coating
Other models available upon request

Polyurethane Coating

Applied to the outer ring's outer surface
Has a precisely polished surface
Hardness: HS90±3
Operating temperature: -30 °C to +70 °C

Rolling elements

Precision balls made of corrosion-resistant steel for smooth operation

Gaskets / Cover Plates

With a non-grinding backing pad (2Z)
Cover plates are made of corrosion-resistant steel
Application-specific seal options available upon request

Cage

Made of corrosion-resistant steel in accordance with the requirements
Other cage designs are available upon request

Lubricant

Available in a greased version
More than 200 lubricants are available for application-specific solutions

Examples of Use

Printing and Finishing Machines
ATMs
Ticket Vending Machines

Stainless-steel miniature tapered rollers of the ZL 6…VA series are used in a variety of applications where there is a risk of corrosion.

They allow for easy assembly into modules. The ball bearings are already pressed onto the journal with a defined fit, with a pull-off force of ≥ 49 N. They are secured with screws using the hex socket on the end face. The dimensions D and B depend on the choice of ball bearing.

In addition to the bearing models listed here, SBN offers custom solutions tailored to your needs.
We would be happy to advise you personally—please contact us!

General

Rolling bearing tolerances according to DIN 620, tolerance class PN
Other configurations available upon request

Inner and outer rings
(miniature ball bearings)

Made of corrosion-resistant steel
High-precision raceways for optimal friction and noise characteristics
Other models available upon request

Rolling Elements
(Miniature Ball Bearings)

Precision balls made of corrosion-resistant steel for smooth operation; alternatively, made of ceramic (electrically insulated hybrid bearings)

Seals / Retaining Rings
(Miniature Ball Bearings)

Open design, with a non-abrasive cover plate (2Z), with a non-abrasive seal (2RU or LLB), and with an abrasive seal (2RS or LLU/LLUX)
Cover plates are made of corrosion-resistant steel, and gaskets are made of sheet steel-reinforced NBR
Application-specific seal options (e.g., FKM/Viton, PTFE/Teflon) available upon request

Cage
(miniature ball bearing)

Made of corrosion-resistant steel or glass-fiber-reinforced plastic, as required
Other cage materials (e.g., PEEK, Torlon) are available upon request

Lubricant
(miniature ball bearings)

Available in greased and oiled versions
Standard grease: S001 | Standard oil: S901
More than 200 lubricants are available for application-specific solutions

Cone

Hex socket on the end face
Made of corrosion-resistant steel

Stainless-steel miniature curved rollers of the KR 4…VA series, featuring roller pins and mounting threads, are used in a variety of applications where there is a risk of corrosion.

These small assemblies are based on two miniature ball bearings and are fitted with cover plates on both sides.

The raceway is a steel sleeve that is press-fitted with a specified interference fit onto two ball bearings. At the end, the threaded bolt is equipped with a hex socket for holding it in place during assembly. A mounting nut is included in the scope of delivery.

In addition to the bearing models listed here, SBN offers custom solutions tailored to your needs.
We would be happy to advise you personally—please contact us!

General

Other models available upon request

Inner and outer rings
(miniature ball bearings)

Through-hardened roller bearing steel with a very high degree of purity for a longer service life
High-precision raceways for optimal friction and noise performance
Other models available upon request

Rolling Elements
(Miniature Ball Bearings)

Precision balls made of fully hardened, high-purity rolling-bearing steel for smooth operation

Seals / Retaining Rings
(Miniature Ball Bearings)

With a non-grinding cover wheel (2Z)
Cover plates are made of sheet steel

Cage
(miniature ball bearing)

Made of steel or glass-fiber-reinforced plastic, as required

Lubricant
(miniature ball bearings)

Available in a greased version
Standard grease: S001
More than 200 lubricants are available for application-specific solutions

Steel Casing / Reel

Is pressed onto two ball bearings each with a defined fit
Serves as a runway
Made of corrosion-resistant steel

Bolt

Threaded
Hex socket on the end face

Hex nut

Made of corrosion-resistant steel

Single-row miniature rollers of the LR 6… series are designed like single-row deep-groove ball bearings, but feature a reinforced, crowned outer ring and can accommodate both radial and axial forces from both directions.
Furthermore, this bearing design can help minimize the risk of edge stresses that may arise from misalignment.

For normal use of the bearing as a roller (running on a flat surface or a cam), the load ratings Crw or C0rw should be used. These ratings were determined by taking into account the bending stress on the outer ring that occurs under load and the resulting change in load distribution within the bearing due to elastic deformation.

In addition, our bearings are also available in corrosion-resistant versions.
You can find the corresponding selection of products in the “Stainless Steel Rollers” section.

In addition to the bearing models listed here, SBN offers custom solutions tailored to your specific needs.
We would be happy to advise you personally—please contact us!

General

Tolerances according to DIN 620, tolerance class PN/P0
Bearing Air CN
Other configurations available upon request

Inner and outer rings

Through-hardened roller bearing steel with a very high degree of purity for a longer service life
High-precision raceways for optimal friction and noise performance
Spherical outer ring surface

Rolling elements

Precision balls made of high-purity, through-hardened roller bearing steel for smooth operation

Gaskets / Cover Plates

Open design with a sliding seal (2RS or LLU/LLUX)
Cover plates are made of sheet steel, and gaskets are made of sheet steel-reinforced NBR
Application-specific seal options available upon request

Cage

Made of glass-fiber-reinforced plastic

Lubricant

Available in greased and oiled versions
More than 200 lubricants are available for application-specific solutions

Examples of Use

Chest Compression Device
Semiconductor Industry
Conveyor Belts
Timing Belt Guide

Stainless-steel miniature roller bearings with a rounded arch profile from the LFR…G…VA series are designed like single-row deep-groove ball bearings, but feature a reinforced and profiled (rounded arch) outer ring and can accommodate both radial and axial forces from both directions.

Stainless steel, which is highly resistant to corrosion, is used for the rings, rolling elements, cages, and cover plates. Consequently, this bearing type is used in a variety of applications where there is a risk of corrosion.

These maintenance-free, low-noise rollers are suitable for high travel speeds and are primarily used to guide and redirect ropes and wires.

In addition to the bearing models listed here, SBN offers custom solutions tailored to your specific needs.
We would be happy to advise you personally—please contact us!

General

Other configurations available upon request

Inner and outer rings

Made of corrosion-resistant steel
High-precision raceways for optimal friction and noise performance
Outer ring with a round arch profile
Other models available upon request

Rolling elements

Precision balls made of corrosion-resistant steel for smooth operation

Gaskets / Cover Plates

Open design with a non-abrasive cover wheel (2Z)
Cover plates are made of corrosion-resistant steel

Cage

Made of corrosion-resistant steel in accordance with the requirements
Other cage models available upon request

Lubricant

Available in greased and oiled versions
More than 200 lubricants are available for application-specific solutions

Stainless-steel miniature roller bearings with a rounded arch profile from the LFR…U…VA series are constructed like single-row deep-groove ball bearings, but feature a reinforced and profiled (U-profile) outer ring and can accommodate both radial and axial forces from both directions.

Stainless steel, which is highly resistant to corrosion, is used for the rings, rolling elements, cages, and cover plates. Consequently, this bearing type is used in a variety of applications where there is a risk of corrosion.

These maintenance-free, low-noise rollers are suitable for high travel speeds and are primarily used for guidance in control curves (slide guidance), with the rectangular profile serving as the flange.

In addition to the bearing models listed here, SBN offers custom solutions tailored to your specific needs.
We would be happy to advise you personally—please contact us!

General

Other configurations available upon request

Inner and outer rings

Made of corrosion-resistant steel
High-precision raceways for optimal friction and noise performance
Outer ring with a U-shaped profile
Other models available upon request

Rolling elements

Precision balls made of corrosion-resistant steel for smooth operation

Gaskets / Cover Plates

Open design with a non-abrasive cover wheel (2Z)
Cover plates are made of corrosion-resistant steel
Application-specific seal options available upon request

Cage

Made of corrosion-resistant steel in accordance with the requirements
Other cage models available upon request

Lubricant

Available in greased and oiled versions
More than 200 lubricants are available for application-specific solutions

Examples of Use

Semiconductor Industry
Timing Belt Guide

Stainless-steel miniature rollers with a round-arch profile from the LFR…V…VA series are constructed like single-row deep-groove ball bearings, but feature a reinforced and profiled (V-groove) outer ring and can accommodate both radial and axial forces from both directions.

Stainless steel, which is highly resistant to corrosion, is used for the rings, rolling elements, cages, and cover plates. Consequently, this bearing type is used in a variety of applications where there is a risk of corrosion.

These maintenance-free, low-noise rollers are suitable for high travel speeds and are primarily used for guiding and redirecting ropes and wires, or as straightening rollers.

In addition to the bearing models listed here, SBN offers custom solutions tailored to your specific needs.
We would be happy to advise you personally—please contact us!

General

Other configurations available upon request

Inner and outer rings

Made of corrosion-resistant steel
High-precision raceways for optimal friction and noise performance
Outer ring with V-groove
Other models available upon request

Rolling elements

Precision balls made of corrosion-resistant steel for smooth operation
Other materials available upon request

Gaskets / Cover Plates

Open design with a non-abrasive cover wheel (2Z)
Cover plates are made of corrosion-resistant steel
Application-specific seal options available upon request

Cage

Made of corrosion-resistant steel in accordance with the requirements
Other cage models available upon request

Lubricant

Available in greased and oiled versions
More than 200 lubricants are available for application-specific solutions

Examples of Use

Cable Pulley Guide

Double-row miniature roller bearings of the LR 6… series are designed similarly to double-row ball bearings, but feature a reinforced, spherical outer ring and can accommodate both radial and axial forces from both directions.
Furthermore, this bearing design can help minimize the risk of edge stresses that may arise from misalignment.

For normal use of the bearing as a roller (running on a flat surface or a cam), the load ratings Crw or C0rw should be used. These ratings were determined by taking into account the bending stress on the outer ring that occurs under load and the resulting change in load distribution within the bearing due to elastic deformation.

In addition, our bearings are also available in corrosion-resistant versions.
You can find the corresponding selection of products in the “Stainless Steel Rollers” section.

In addition to the bearing models listed here, SBN offers custom solutions tailored to your specific needs.
We would be happy to advise you personally—please contact us!

General

Tolerances according to DIN 620, tolerance class PN/P0
Bearing Air CN
Other configurations available upon request

Inner and outer rings

Through-hardened roller bearing steel with a very high degree of purity for a longer service life
High-precision raceways for optimal friction and noise performance
Spherical outer ring surface

Rolling elements

Precision balls made of high-purity, through-hardened roller bearing steel for smooth operation

Gaskets / Cover Plates

Open design with a sliding seal (2RS or LLU/LLUX)
Cover plates are made of sheet steel, and gaskets are made of sheet steel-reinforced NBR
Application-specific seal options available upon request

Cage

Made of glass-fiber-reinforced plastic

Lubricant

Available in greased and oiled versions
More than 200 lubricants are available for application-specific solutions

Stainless-steel RASEY…VA series standing bearing housing assemblies, consisting of a clamping bearing mounted in a plastic housing, are used in a variety of applications where there is a risk of moisture, UV radiation, bacterial and fungal growth, and exposure to chemical substances.

Stainless steel, which is characterized by high corrosion resistance, is used for the rings, rolling elements, cages, spacer discs, and threaded pins. The seals are made of sheet steel-reinforced NBR, and the housings—which can be subjected to radial (static) loads up to a maximum of CG and axial loads up to a maximum of 0.25 x CG—are made of glass-fiber-reinforced PBTP plastic.

In these FDA-approved plain bearing housing units, the inner ring is secured to the shaft by two threaded pins offset by 120°, and relubrication can be performed via the corresponding grease fittings.

The housings are available in black, blue, and white and can also be supplied with protective caps in open (CO) and closed (CC) versions, as well as with rear gaskets (BS).

In addition to the bearing models listed here, SBN offers custom solutions tailored to your needs.
We would be happy to advise you personally—please contact us!

General

DA-approved
Protective caps in open (CO) and closed (CC) versions, as well as back seals (BS), can be ordered separately
Other configurations available upon request

Inner and outer rings
(tension bearings)

Made of corrosion-resistant steel
High-precision raceways for optimal friction and noise performance
Spherical outer ring with lubrication bore
The inner ring is secured to the shaft by two set screws spaced 120° apart
Other models available upon request

Rolling Elements
(Tension Bearings)

Precision balls made of corrosion-resistant steel for smooth operation

Seals / Washer Plates
(Tension Bearings)

With a sliding seal (KRR)
Radially preloaded sealing lip
Seals are made of sheet steel-reinforced NBR, and spacer washers are made of corrosion-resistant steel.
Application-specific seal options available upon request

Cage
(tension bearing)

Made of corrosion-resistant steel
Other cage models available upon request

Lubricant
(tension bearing)

Available in a greased version
Can be relubricated through grease fittings
More than 200 lubricants are available for application-specific solutions

Housing

Made of glass-fiber-reinforced PBTP plastic
Equipped with grease fittings
Available in black, blue, and white
Can be loaded radially (static) up to a maximum of CG and axially up to a maximum of 0.25 x CG

Examples of Use

Food Technology
Packaging Machines

Stainless steel pedestal bearing housing units of the RSHEY…VA, consisting of a tension bearing mounted in a plastic housing, are used in a variety of applications where there is a risk of moisture, UV radiation, bacterial and fungal growth, and exposure to chemical substances.

Stainless steel, which is characterized by high corrosion resistance, is used for the rings, rolling elements, cages, spacer discs, and threaded pins. The seals are made of sheet steel-reinforced NBR, and the housings—which can be subjected to radial (static) loads up to a maximum of CG and axial loads up to a maximum of 0.25 x CG—are made of glass-fiber-reinforced PBTP plastic.

In these FDA-approved plain bearing housing units, the inner ring is secured to the shaft by two threaded pins offset by 120°, and relubrication can be performed via the corresponding grease fittings.

The housings are available in black, blue, and white and can also be supplied with protective caps in open (CO) and closed (CC) versions, as well as with rear gaskets (BS).

In addition to the bearing models listed here, SBN offers custom solutions tailored to your needs.
We would be happy to advise you personally—please contact us!

General

FDA-approved
Protective caps in open (CO) and closed (CC) versions, as well as back seals (BS), can be ordered separately
Other configurations available upon request

Inner and outer rings
(tension bearings)

Made of corrosion-resistant steel
High-precision raceways for optimal friction and noise performance
Spherical outer ring with lubrication bore
The inner ring is secured to the shaft by two set screws spaced 120° apart
Other models available upon request

Rolling Elements
(Tension Bearings)

Precision balls made of corrosion-resistant steel for smooth operation

Seals / Washer Plates
(Tension Bearings)

With a sliding seal (KRR)
Radially preloaded sealing lip
Seals are made of sheet steel-reinforced NBR, and spacer washers are made of corrosion-resistant steel.
Application-specific seal options available upon request

Cage
(tension bearing)

Made of corrosion-resistant steel
Other cage models available upon request

Lubricant
(tension bearing)

Available in a greased version
Can be relubricated through grease fittings
More than 200 lubricants are available for application-specific solutions

Housing

Made of glass-fiber-reinforced PBTP plastic
Equipped with grease fittings
Available in black, blue, and white
Can be loaded radially (static) up to a maximum of CG and axially up to a maximum of 0.25 x CG

Examples of Use

Food Technology
Packaging Machines

Stainless steel UCP…VA series plummer block housing units, consisting of a clamped bearing mounted in a stainless steel housing, are used in a variety of applications where there is a risk of moisture and exposure to chemical substances.

Stainless steel, which offers excellent corrosion resistance, is used for the rings, rolling elements, cages, adapter washers, threaded pins, and housings. The seals are made of sheet steel-reinforced NBR.

In these plain bearing housing assemblies, the inner ring is secured to the shaft by two set screws spaced 120° apart, and relubrication can be performed using the appropriate grease fittings.

In addition to the bearing models listed here, SBN offers custom solutions tailored to your needs.
We would be happy to advise you personally—please contact us!

General

Other configurations available upon request

Inner and outer rings
(tension bearings)

Made of corrosion-resistant steel
High-precision raceways for optimal friction and noise performance
Spherical outer ring with lubrication bore
The inner ring is secured to the shaft by two set screws spaced 120° apart
Other models available upon request

Rolling Elements
(Tension Bearings)

Precision balls made of corrosion-resistant steel for smooth operation

Seals / Washer Plates
(Tension Bearings)

With a sliding seal (KRR)
Radially preloaded sealing lip
Seals are made of sheet steel-reinforced NBR, and spacer washers are made of corrosion-resistant steel.
Application-specific seal options available upon request

Cage
(tension bearing)

Made of corrosion-resistant steel
Other cage models available upon request

Lubricant
(tension bearing)

Available in a greased version
Can be relubricated via grease nipples
More than 200 lubricants are available for application-specific solutions

Housing

Made of corrosion-resistant steel
Equipped with grease fittings

Examples of Use

Food Technology
Packaging Machines

Stainless steel two-hole flanged bearing housing units of the RCJY…VA, consisting of a tension bearing mounted in a plastic housing, are used in various applications where there is a risk of moisture, UV radiation, bacterial and fungal growth, and exposure to chemical substances.

Stainless steel, which is characterized by high corrosion resistance, is used for the rings, rolling elements, cages, spacer discs, and threaded pins. The seals are made of sheet steel-reinforced NBR, and the housings—which can be subjected to radial (static) loads up to a maximum of CG and axial loads up to a maximum of 0.25 x CG—are made of glass-fiber-reinforced PBTP plastic.

In these FDA-approved two-hole flanged bearing housing units, the inner ring is secured to the shaft by two threaded pins offset by 120°, and relubrication can be performed using the appropriate grease fittings.

The housings are available in black, blue, and white and can also be supplied with protective caps in open (CO) and closed (CC) versions, as well as with rear seals (BS).

In addition to the bearing models listed here, SBN offers custom solutions tailored to your needs.
We would be happy to advise you personally—please contact us!

General

FDA-approved
Protective caps in open (CO) and closed (CC) versions, as well as back seals (BS), can be ordered separately
Other configurations available upon request

Inner and outer rings
(tension bearing)

Made of corrosion-resistant steel
High-precision raceways for optimal friction and noise performance
Spherical outer ring with lubrication bore
The inner ring is secured to the shaft by two threaded pins spaced 120° apart
Other models available upon request

Rolling Elements
(Tension Bearings)

Precision balls made of corrosion-resistant steel for smooth operation

Seals / Cover Plates
(Tension Bearings)

With a sliding seal (KRR)
Radially preloaded sealing lip
Seals are made of sheet steel-reinforced NBR, and spacer discs are made of corrosion-resistant steel.
Application-specific seal options available upon request

Cage
(tension bearing)

Made of corrosion-resistant steel
Other cage models available upon request

Lubricant
(tension bearing)

Available in a greased version
Can be relubricated through grease fittings
More than 200 lubricants are available for application-specific solutions

Housing

Available in a greased version
Can be relubricated through grease fittings
More than 200 lubricants are available for application-specific solutions

Examples of Use

Food Technology
Packaging Machines

Stainless-steel two-hole flanged bearing housing units of the GLCTE… seriesVA, consisting of a tension bearing mounted in a plastic housing, are used in a variety of applications where there is a risk of moisture, UV radiation, bacterial and fungal growth, and exposure to chemical substances.

Stainless steel, which is characterized by high corrosion resistance, is used for the rings, rolling elements, cages, adapter discs, eccentric clamping rings, and threaded pins. The seals are made of sheet steel-reinforced NBR, and the housings—which may be subjected to radial (static) loads up to a maximum of CG and axial loads up to a maximum of 0.25 x CG—are made of glass-fiber-reinforced PBTP plastic.

In these FDA-approved two-hole flanged bearing housing units, the inner ring is secured to the shaft with an eccentric clamping ring, and relubrication can be performed via the appropriate grease fittings.

The housings are available in black, blue, and white and can also be supplied with protective caps in open (CO) and closed (CC) versions, as well as with rear seals (BS).

In addition to the bearing models listed here, SBN offers custom solutions tailored to your needs.
We would be happy to advise you personally—please contact us!

General

FDA-approved
Protective caps in open (CO) and closed (CC) versions can be ordered separately
Other configurations available upon request

Inner and outer rings
(tension bearing)

Made of corrosion-resistant steel
High-precision raceways for optimal friction and noise performance
Spherical outer ring with lubrication bore
Inner ring secured to the shaft with an eccentric clamping ring
Other models available upon request

Rolling Elements
(Tension Bearings)

Precision balls made of corrosion-resistant steel for smooth operation

Seals / Cover Plates
(Tension Bearings)

With a sliding seal (NPP)
Axially preloaded sealing lip
Seals are made of sheet steel-reinforced NBR, and spacer discs are made of corrosion-resistant steel.
Application-specific seal options available upon request

Cage
(tension bearing)

Made of corrosion-resistant steel
Other cage models available upon request

Lubricant
(Tension Bearing)

Available in a greased version
Can be relubricated through a lubrication hole
More than 200 lubricants are available for application-specific solutions

Housing

Made of glass-fiber-reinforced PBTP plastic
Equipped with a grease nipple
Available in black, blue, and white
Can be loaded radially (static) up to a maximum of CG and axially up to a maximum of 0.25 x CG

Examples of Use

Food Technology
Packaging Machines

Stainless steel two-hole flanged bearing housing units of the UCFL…VA series, consisting of a tension bearing mounted in a stainless steel housing, are used in a variety of applications where there is a risk of moisture and exposure to chemical substances.

Stainless steel, which is highly resistant to corrosion, is used for the rings, rolling elements, cages, adapter plates, threaded pins, and housings. The seals are made of sheet steel-reinforced NBR.

In these two-hole flanged bearing housing units, the inner ring is secured to the shaft by two set screws offset by 120°, and relubrication can be performed via the corresponding grease fittings.

In addition to the bearing models listed here, SBN offers custom solutions tailored to your needs.
We would be happy to advise you personally—please contact us!

General

Other configurations available upon request

Inner and outer rings
(tension bearing)

Made of corrosion-resistant steel
High-precision raceways for optimal friction and noise performance
Spherical outer ring with lubrication bore
The inner ring is secured to the shaft by two threaded pins spaced 120° apart
Other models available upon request

Rolling Elements
(Tension Bearings)

Precision balls made of corrosion-resistant steel for smooth operation

Seals / Cover Plates
(Tension Bearings)

With a sliding seal (KRR)
Radially preloaded sealing lip
Seals are made of sheet steel-reinforced NBR, and spacer discs are made of corrosion-resistant steel.
Application-specific seal options available upon request

Cage
(tension bearing)

Made of corrosion-resistant steel
Other cage models available upon request

Lubricant
(Tension Bearing)

Available in a greased version
Can be relubricated through grease fittings
More than 200 lubricants are available for application-specific solutions

Housing

Made of corrosion-resistant steel
Equipped with a grease nipple

Examples of Use

Food Technology
Packaging Machines

Stainless-steel four-hole flanged bearing housing units of the RCJY…VA, consisting of a tension bearing mounted in a plastic housing, are used in a variety of applications where there is a risk of moisture, UV radiation, bacterial and fungal growth, and exposure to chemical media.

Stainless steel, which offers high corrosion resistance, is used for the rings, rolling elements, cages, spacer discs, and threaded pins. The seals are made of sheet steel-reinforced NBR, and the housings—which may be subjected to radial (static) loads up to a maximum of CG and axial loads up to a maximum of 0.25 x CG—are made of glass-fiber-reinforced PBTP plastic.

In these FDA-approved four-hole flanged bearing housing assemblies, the inner ring is secured to the shaft by two set screws offset by 120°, and relubrication can be performed using the appropriate grease fittings.

The housings are available in black, blue, and white and can also be supplied with protective caps in open (CO) and closed (CC) versions, as well as with rear seals (BS).

In addition to the bearing models listed here, SBN offers custom solutions tailored to your needs.
We would be happy to advise you personally—please contact us!

General

FDA-approved
Protective caps in open (CO) and closed (CC) designs, as well as back seals (BS), can be ordered separately
Other configurations available upon request

Inner and outer rings
(tension bearing)

Made of corrosion-resistant steel
High-precision raceways for optimal friction and noise characteristics
Spherical outer ring with lubrication bore
The inner ring is secured to the shaft by two set screws spaced 120° apart
Other models available upon request

Rolling Elements
(Tension Bearings)

Precision balls made of corrosion-resistant steel for smooth operation

Seals / Washer Plates
(Clamping Bearings)

With a sliding seal (KRR)
Radially preloaded seal lip
Seals are made of sheet steel-reinforced NBR, and spacer washers are made of corrosion-resistant steel
Application-specific seal options available upon request

Cage
(tension bearing)

Made of corrosion-resistant steel
Other cage models available upon request

Lubricant
(tension bearing)

Available in a greased version
Can be relubricated through grease fittings
More than 200 lubricants are available for application-specific solutions

Housing

Made of glass-fiber-reinforced PBTP plastic
Equipped with a grease fitting
Available in black, blue, and white
Can be loaded radially (static) up to a maximum of CG and axially up to a maximum of 0.25 x CG

Examples of Use

Food Technology
Packaging Machines

Stainless steel four-hole flanged bearing housing units of the UCF…VA series, consisting of a clamping bearing mounted in a stainless steel housing, are used in a variety of applications where there is a risk of moisture and exposure to chemical substances.

Stainless steel, which is characterized by high corrosion resistance, is used for the rings, rolling elements, cages, adapter plates, threaded pins, and housings. The seals are made of sheet steel-reinforced NBR.

In these four-hole flange bearing housing assemblies, the inner ring is secured to the shaft by two set screws spaced 120° apart, and relubrication can be performed using the appropriate grease fittings.

In addition to the bearing models listed here, SBN offers custom solutions tailored to your needs.
We would be happy to advise you personally—please contact us!

General

Other configurations available upon request

Inner and outer rings
(tension bearing)

Made of corrosion-resistant steel
High-precision raceways for optimal friction and noise characteristics
Spherical outer ring with lubrication bore
The inner ring is secured to the shaft by two set screws spaced 120° apart
Other models available upon request

Rolling Elements
(Tension Bearings)

Precision balls made of corrosion-resistant steel for smooth operation

Seals / Washer Plates
(Clamping Bearings)

With a sliding seal (KRR)
Radially preloaded seal lip
Seals are made of sheet steel-reinforced NBR, and spacer washers are made of corrosion-resistant steel
Application-specific seal options available upon request

Cage
(tension bearing)

Made of corrosion-resistant steel
Other cage models available upon request

Lubricant
(tension bearing)

Available in a greased version
Can be relubricated through grease fittings
More than 200 lubricants are available for application-specific solutions

Housing

Made of corrosion-resistant steel
Equipped with a grease fitting

Examples of Use

Food Technology
Packaging Machines

Double-row self-aligning ball bearings are self-aligning rolling bearings that reliably compensate for angular misalignment between the shaft and the housing. Due to their design, they are particularly suitable for applications involving misalignment, shaft deflection, or installation inaccuracies, and ensure smooth, low-vibration operation.

The bearings comply with the tolerances specified in DIN 620 and the main dimensions specified in DIN 630, Sheet 1. They feature two raceway grooves on the inner ring and a hollow-spherical outer ring raceway, which provides high angular adjustability and uniform load distribution.

The inner and outer rings are made of case-hardened, high-purity rolling-bearing steel, which ensures high load-carrying capacity and a long service life. High-precision raceways optimize friction and noise characteristics even under demanding operating conditions.

Precision balls made of high-quality rolling bearing steel are used as rolling elements; ceramic balls are also available as an option for electrically insulated hybrid bearings. Depending on the application, open designs as well as versions with a sliding seal (2RS or LLU/LLUX) are available.

Depending on the requirements, the cage is manufactured from steel or glass-fiber-reinforced plastic. This allows the rotational speed, temperature resistance, and operating characteristics to be optimally adapted to the specific application.

Double-row self-aligning ball bearings are available in greased or oiled versions. For special applications, a wide selection of lubricants and customized lubrication concepts are available.

Advantages

Compensation for Alignment Errors and Angular Deviations
Smooth, low-vibration operation even under load
High load capacity and long service life
Precise raceways for optimized friction and noise performance
Various seal and cage designs are available
Optionally available as a hybrid bearing (electrically insulated)
Available greased or oiled
Custom solutions are available (e.g., coatings, special dimensions, carbonitriding)

In addition, these bearings are also available in a corrosion-resistant version.

Stainless steel, which is highly resistant to corrosion, is used for the rings, rolling elements, cages, adapter rings, and threaded pins. The seals are made of sheet steel-reinforced NBR.

In this bearing design, the inner ring is secured to the shaft by two set screws offset by 120°, and relubrication can be performed through the lubrication bore in the outer ring. It can accommodate both radial and axial forces from both directions, and thanks to the flared inner ring, tilting is minimized, thereby ensuring smoother operation.

Furthermore, the spherical outer ring surface, when installed in a hollow spherical housing bore, allows for the compensation of misalignment errors caused by installation.

In addition to the bearing models listed here, SBN offers custom solutions tailored to your needs.
We’d be happy to advise you personally—please contact us!

General

Other configurations available upon request

Inner and Outer Rings

Made of corrosion-resistant steel
High-precision raceways for optimal friction and noise performance
Spherical outer ring with lubrication bore
The inner ring is secured to the shaft by two set screws spaced 120° apart
Other models available upon request

Rolling elements

Precision balls made of corrosion-resistant steel for smooth operation

Gaskets / Cover Plates

With a sliding seal (NPP)
Axially preloaded sealing lip
Seals are made of sheet steel-reinforced NBR, and spacer discs are made of corrosion-resistant steel.
Application-specific seal options available upon request

Cage

Made of corrosion-resistant steel
Other cage models available upon request

Lubricant

Available in a greased version
Can be relubricated through a lubrication hole
More than 200 lubricants are available for application-specific solutions

Examples of Use

Food Technology
Spreaders
Packaging Machines
Sugar Beet Harvester

Stainless steel, which is highly resistant to corrosion, is used for the rings, rolling elements, cages, adapter rings, eccentric clamping rings, and threaded pins. The seals are made of NBR reinforced with sheet steel.

In this bearing design, the inner ring is secured to the shaft with an eccentric clamping ring, and relubrication can be performed through the lubrication hole in the outer ring. It can accommodate both radial and axial forces from both directions, and thanks to the flared inner ring, tilting is minimized, thereby ensuring smoother operation.
Furthermore, the spherical surface of the outer ring, when installed in a hollow spherical housing bore, allows for the compensation of misalignment errors caused during installation.

In addition to the bearing models listed here, SBN offers custom solutions tailored to your needs.
We’d be happy to advise you personally—please contact us!

General

Other configurations available upon request

Inner and Outer Rings

Made of corrosion-resistant steel
High-precision raceways for optimal friction and noise performance
Spherical outer ring with lubrication bore
The inner ring is secured to the shaft using an eccentric clamping ring
Other models available upon request

Rolling elements

Precision balls made of corrosion-resistant steel for smooth operation

Gaskets / Cover Plates

With a sliding seal (NPP)
Axially preloaded sealing lip
Seals are made of sheet steel-reinforced NBR, and spacer discs are made of corrosion-resistant steel.
Application-specific seal options available upon request

Cage

Made of corrosion-resistant steel
Other cage models available upon request

Lubricant

Available in a greased version
Can be relubricated through a lubrication hole
More than 200 lubricants are available for application-specific solutions

Examples of Use

Food Technology
Spreaders
Packaging Machines
Sugar Beet Harvester

Stainless steel, which is highly resistant to corrosion, is used for the rings, rolling elements, cages, adapter rings, and threaded pins. The seals are made of sheet steel-reinforced NBR.

In this bearing design, the inner ring is secured to the shaft by two set screws offset by 120°, and relubrication can be performed through the lubrication hole in the outer ring.
It can accommodate both radial and axial forces from both directions, and thanks to the flared inner ring, tilting is minimized, thereby ensuring smoother operation.
Furthermore, the spherical outer surface of the outer ring, when installed in a hollow spherical housing bore, allows for the compensation of misalignment errors caused during installation.

In addition to the bearing models listed here, SBN offers custom solutions tailored to your needs.
We’d be happy to advise you personally—please contact us!

General

Other configurations available upon request

Inner and Outer Rings

Made of corrosion-resistant steel
High-precision raceways for optimal friction and noise performance
Spherical outer ring with lubrication bore
The inner ring is secured to the shaft by two set screws spaced 120° apart
Other models available upon request

Rolling elements

Precision balls made of corrosion-resistant steel for smooth operation

Gaskets / Cover Plates

With a sliding seal (KRR)
Radially preloaded sealing lip
Seals are made of sheet steel-reinforced NBR, and spacer discs are made of corrosion-resistant steel.
Application-specific seal options available upon request

Cage

Made of corrosion-resistant steel
Other cage models available upon request

Lubricant

Available in a greased version
Can be relubricated through a lubrication hole
More than 200 lubricants are available for application-specific solutions

Examples of Use

Food Technology
Spreaders
Packaging Machines
Sugar Beet Harvester

In addition to the bearing models listed here, SBN offers custom solutions tailored to your needs.
We’d be happy to advise you personally—please contact us!

General

Tolerances according to DIN 618

Inner and outer rings

Thin-walled, machining-free outer sleeve
The shaft serves as a raceway (hardened and ground)
If the shaft cannot be designed as a raceway, suitable inner rings are offered as an alternative.

Rolling elements

Rolling elements made of fully hardened, high-purity bearing steel for smooth operation

Gaskets / Cover Plates

Open design with a sliding seal (2RS)
Cover plates are made of sheet steel, and gaskets are made of sheet steel-reinforced NBR

Cage

Made of steel or glass-fiber-reinforced plastic, as required

Lubricant

Available in greased and oiled versions
More than 200 lubricants are available for application-specific solutions

Examples of Use

E-Bike Drive System
Bicycle
Woodworking
Power Tool

Rolling-element bearing greases and lubricants are critical to the service life, efficiency, and operational reliability of bearings and machine components. The selection of the appropriate lubricant depends on factors such as rotational speed, temperature, load, environmental conditions, and the requirements of the specific application.

SBN offers a wide range of grease and oil lubricants for use in rolling bearings, electric motors, gearboxes, pumps, and general mechanical engineering applications. FDA- and NSF-approved lubricants also allow for use in the food, pharmaceutical, and packaging industries.

The optimal balance of base oil, thickeners, and additives reduces friction and wear, prevents corrosion, and allows for extended relubrication intervals. As a result, high-quality lubricants contribute to high availability and an extended service life for machines and equipment.

Advantages

Custom selection based on technical requirements
Reliable Lubrication of Rolling Bearings and Machine Components
Reducing Friction and Wear
Protection against corrosion and aging
Long service life and relubrication intervals
Suitable for high and low temperatures
FDA- and NSF-approved lubricants for the food industry are available
Suitable for mechanical engineering, gear manufacturing, electric motors, pumps, and material handling systems

Axial manufacturing tolerances and tolerance chains can lead to unwanted play in bearings and assemblies. By combining different thicknesses, installation dimensions and bearing clearance can be precisely adjusted to ensure accurate axial positioning.

The corrosion-resistant and heat-treated SBN shims are manufactured without burrs and feature a very high surface finish as well as high dimensional accuracy. They are suitable for demanding applications in mechanical engineering, gear manufacturing, electric motor manufacturing, pump manufacturing, and drive technology.

Advantages

Reliable performance and long service life
Precise adjustment of installation dimensions and bearing clearance
Compensation for Axial Tolerances and Tolerance Chains
Combinations of different thicknesses are possible
Corrosion-resistant and heat-treated
Burr-free design with a high-quality finish
High dimensional accuracy and repeatability
Suitable for ball bearings and other rolling element bearings

Wave spring washers are used to generate defined axial preload forces and to compensate for tolerances, settlement, and thermally induced changes in length. Thanks to their compact design, they provide a space-saving solution for ensuring uniform force transmission and reducing play in assemblies.

Manufactured from high-quality spring steel, these wave spring washers are characterized by high elasticity, reliable spring action, and a long service life. They are suitable for applications in mechanical engineering, gear manufacturing, electric motor manufacturing, pump manufacturing, and in conveying and drive technology.

Thanks to their defined spring characteristics, wave spring washers help maintain constant preload in rolling bearings and machine components, contributing to increased operational reliability and smooth bearing operation.

Advantages

Defined Axial Preload of Rolling Bearings and Components
Compensation for Tolerances and Thermal Length Changes
Compact and space-saving design
Uniform Power Transmission
High elasticity and long service life
Reliable spring action even under dynamic loads
Suitable for mechanical engineering, gearbox manufacturing, and drive technology

Square locknuts are used for axial locking and precise positioning of roller bearings, bearing sleeves, and other machine components on shafts. Thanks to their compact design and four contact surfaces, they ensure reliable power transmission and easy installation using appropriate wrenches or tools.

Lock nuts are used to adjust bearing clearance and preload, as well as to securely fasten components. Thanks to their high dimensional accuracy and robust design, they are suitable for demanding applications in mechanical engineering, gear manufacturing, electric motor manufacturing, pump manufacturing, and drive technology.

Square lock nuts are available in various sizes and offer a cost-effective solution for durable and reliable bearings.

Advantages

Available in various sizes and styles
Reliable axial locking of roller bearings and machine components
Precise adjustment of bearing clearance and preload
Compact design with easy installation
High dimensional accuracy and reliable power transmission
Suitable for mechanical engineering, gear manufacturing, and drive technology
High operational reliability and long service life

COMMUNICATION

Speak openly. Act honestly. Treat others with respect.
This is how we foster communication that brings people together and builds trust.
This applies both within our SBN team and in our interactions with our customers and partners.

Customer Focus

We offer professional, solution-oriented, and client-focused consulting to provide our clients with the best possible support in every situation.

RESPONSIBILITY

We are constantly growing in our commitment to our employees, customers, partners, and the environment.

Quality and Reliability

Our mission is to support our customers with practical and sustainable solutions. We always aim to create long-term value and build trust through quality.

Collaboration

Respectful and appreciative collaboration is important to us. We are united by
the belief that we can achieve more as a team than any of us can on our own.

HOW TO FIND US

Get in touch

Martina Weisen­stein

Markus Kleer

Lydia Beschmann

Daniel Klinner

Michael Robert

Yasemin Elmas

Patrick Weyrich

Pascal Lothschütz

Eva Rech

Jens Salisbury

Timo Kreuscher

Udo Pirrung

Julian Wagner

Guido Keich

Kevin Wagner

Jamil Chaya

Eric Hoffmann

Aaron Wagner

Arno Rech

Ingrid Söth

Stefan Gerritsen

Markus Gschwandtner

Christian Kreul

Karin Scheu­ermann

Sebastian Nagel

Marcus Bulgan

Lukas Körbel

Philipp Schullan

Jennifer Bäcker

Bianca Majunke

Jutta Simon

Tim Hutzel

Julie

Silvia Morsch

Roger Dawidowsky

Peter Schneider

Peter Tiede

Gabriele Tynek

Michael Müller

Lena Jung

Christine Planz

Heiko Hartmann

Robert Kronwid

OUR SPECIA­LISTS NEAR YOU

SCHÖNENBERG-KÜBELBERG HEADQUARTERS

HOW
TO FIND US

Martina Weisenstein

Karin Scheuermann

OUR SPECIALISTS
NEAR YOU